Here’s some discounted prices for the Sense V-Jet Kit.
The Sense V-Jet is an all-in-one starter kit. It features a box mod with 230 watts of output, a wide range of temperature modes, a color display and is available in either a dual 18650 or 20700 versions. The included tank has an easy top fill system and a massive 5.5ml tank capacity with bottom adjustable airflow.
With measurements of 49.5mm x 91.0mm, the V-Jet mod is pretty compact. Unfortunately, the width is not listed in the specifications, perhaps because there’s two battery versions with different widths. The design is curved and all options features a black chassis with stripes that are available in red, orange, yellow, green cyan, blue, purple, black.
Two versions of the V-Jet mod are available: you can purchase a dual 18650 battery version or one that utilizes two 20700 batteries. The latter will result in longer vaping times. Batteries can be recharged using the on-board micro USB charging setup. The location of the battery bay is unknown at this time, but we imagine the cells are bottom loaded via a hinged battery panel.
While the power button on the device is located on the side, the control face is on the front and features a large full color display that can, in addition to vape data, show date/time. There are also three adjustment buttons for easier menu navigation.
The V-Jet box mod is also quite capable on the technical level. The maximum output wattage is 230 watts and the lowest resistance is 0.10ohm. A wide range of temperature control modes include nickel, titanium, stainless steel, TCR (can be stored in three memory slots) and also a versatile TFR mode that allows temperature control with hybrid coil builds.
The V-Jet tank is made from stainless steel with glass and measures 24.8mm x 61.5mm. On the Sensetech website, the specifications state that the atomizer can hold up to 5.5ml of juice, but anywhere else it is listed as featuring a 4.5ml reservoir. The tank utilizes a top fill system that is accessed via a hinged top cap that flips open to reveal a fill port. Adding juice is effortless! Airflow looks to be located at the bottom and occurs via dual air intakes that can be freely adjusted. To connect to the mod, the tank has a standard 510 connection pin and you will receive a Delrin drip tip that is heat resistant to prevent burning the lips.
Features & Specs.
- V-Jet Box Mod
- Two versions
- Dual 18650
- Dual 20700 (longer vaping times)
- Micro USB charging port
- Measurements: 49.5mm x 91mm
- Colors: black with yellow, orange, green, teal, blue, purple, black
- Output modes: Power/TC(SS,Ti,Ni)/TCR(M1, M2, M3)/TFR
- Power output range: 7W to 230W
- Resistance Range: 0.10Ω to 3.0Ω
- Variable temperature range: 100℃ to 315℃ or 200℉ to 600℉
- Full color display
- Shows vape data
- Show real time clock
- Three adjustment buttons for easy menu navigation
- Two versions
- V-Jet Tank
- Dimensions: 24.8mm x 61.5mm
- Made from stainless steel
- 510 threaded connector
- 4.5ml or 5.5 ml e-liquid capacity
- Includes Derlin drip tip
- Hinged top fill setup
- Dual adjustable bottom airflow slots