Check out these cheap deals for the Vaporesso Switcher Box Mod or Kit. This mod has a whopping 220 watts of power and versatile temperature control. However, this kit is outdated, so examine newer Vaporesso Mods & Kits.
Blowout! Vaporesso Gen Fit Box Mod Kit $10.02
Vaporesso GTX Go 40 1500mAh 40W $11.99 | Go 80 80W Kit $15.99
Switcher Mod or Kit Overview
The Switcher Box Mod by Vaporesso features the latest OMNI Board 2.6 chip, 220 watts of power, temperature control, balanced charging, a replaceable case, a 0.96-inch OLED screen, and simple operation.
Made from zinc alloy, this mod’s dimensions are 53mm x 89mm x 31mm, and it is available in grey, silver, yellow, and blue with red. The latter colorway has a front-located LED that lights up with different patterns and looks like a transformer figure. Also unique to this particular box mod is that the case slides off and can be replaced (sold separately) for a new appearance. On the front of the mod, you will see a 0.96-inch display with a classic menu that includes two battery bars, current mode, current taste mode, current resistance, current voltage, current power/temperature, and puff time. At the top, a 510 connection bezel is quite wide to allow for large-diameter atomizers.
Built with the latest Omniboard 2.6 chip, the box mod is easily operated via its graphical virtual keys. The device uses dual 18650 batteries that are bottom loaded and recharged via the USB input interface. The charging system is lightning-fast and ensures balanced charging for safety.
Capable of operating in power and temperature control, many details on these operating modes are not yet available. We know that the Vaporesso Switcher is capable of 220 watts and can fire atomizers down to 0.05ohm or 315 degrees Celsius in variable temperature modes. And, if you observe photos of the mod’s display, you can see taste modes that allow for ramp vaping.
Features & Specs
- Dimensions: 53mm x 89mm x 31mm
- Weight: 200g
- Constructed from zinc alloy
- Colors: grey, silver, yellow, blue/red
- Blue/red is built with LED
- 0.96″ OLED display
- Over-sized 510 connection bezel
- Powered by 2 18650 batteries
- Accessed at bottom
- Balanced/fast charging system
- Updated Omniboard 2.6 chip
- Maximum power: 200W
- Temperature output range: 100°C to 315°C or 200°F to 600°F
- Resistance range: 0.05Ω to 5.0
