Here are cheap deals for the Freemax Firelord 80W Box Mod Starter Kit.
The Freemax Firelord kit consists of the Conquerer Box Mod combined with the Firelord Tank. The mod measures 89.2mm x 42.8mm x 25mm and has a stainless steel chassis with beautiful resin finish that has myriad of colors, but is currently only available in green or yellow. A 0.91 inch OLED display is located on the control face and has a wide range of indicators such as current wattage/temperature output, amperage, atomizer resistance and battery life indicator.
The Conquerer utilizes a single 18650 battery and is capable of temperature control with all heating elements as well as variable wattage operation with a maximum output of 80 watts. Resistance is also quite low at 0.05ohm while temperature control modes can achieve 600 degrees Fahrenheit.
Also included with purchase is the Firelord Sub Ohm Tank that has a 22mm diameter, a 2ml tank reservoir and is refilled by removing the top cap. Air intakes at the bottom are adjustable and have dimensions of 15mm x 2mm each. A 10mm wide bore drip tip is included with purchase. The coils inside the Firelord Tank include a pre-built FLK coil that has a 0.25ohm heating element that is rated from 20 to 60 watts. For coil builders, there is an included RBA head that is made with a dual post build deck with 2mm wire holes that utilizes flat head screws to keep your build from moving. With purchase, you will get the Conqueror Mod, the Firelord Tank, an RBA coil, two FLK pre-built coils, a micro USB cable, an extra glass tank, cotton, spare parts and a manual.