The Vaporesso Target 80 is the newest pod mod kit in the vape marketplace. The mod features a 3000mAh integrated battery, 80 watts of power, power mode, a 0.96 inch TFT display, shock resistance, shock resistance, light design, and exquisite panels. Meanwhile, the pod has a 5mL juice capacity, an effortless top fill system, adjustable bottom airflow, and GTX mesh coils for freebase vape juices.
-
USA Deal: Mod Only $22.39
Use coupon code CVD10%at checkout
Target 80 Mod
The Vaporesso Target 80 resembles its predecessors, such as the PM80 and PM80 SE. But the new kit features beautiful black, grey, blue, green, or red panels. The chassis of the new device is also cage-like and has a triangular structure to improve stability in the hand while keeping it very portable and light.
And, that’s not the only way the Target 80 Mod stands apart from the crowd. You see, it is said to be ten times stronger than your average device out there and will remain intact even if dropped from a height of 1.5 meters. This is based on testing done by Smoore Labs.
Even though the kit is compact, it still features a 36% bigger battery, meaning the cell’s total capacity comes in at a whopping 3000mAh. So, even though you carry a compact setup, you’ll still get the longest vape times without needing constant recharging. If you need to top off the cell, you can plug the unit into any USB outlet, such as the one you use for your phone or computer. The USB interface features a reversible Type-C plug, making it easier than ever to work with.
Built with an AXON chipset, the Vaporesso Target 80 can operate in three modes. In variable wattage mode, you may change the wattage output to your liking, but with a maximum of 80 watts. The pulse mode will continuously boost output to ensure a consistent output with throat hit throughout each puff. And the F(t) mode is compatible with more e-juices, so there are no limits.
On the control face, you’ll also see a crystal clear TFT display with all the vape data you need in full color. The user interface shows indicators for the current battery level, the current wattage, the current mode, the atomizer’s resistance, the current voltage, a puff counter, and the time of the last puff.
You may also install a 510 bezel onto the mod for use with traditional atomizers such as the classic NRG -S Tank, GTX Tank, or any 510 atomizers in the marketplace. But you’ll need to buy a 510 converter because it is an optional piece of hardware.
Target 80 Kit
Perhaps the best part of the pod with the Vaporesso Target 80 Kit is that it utilizes coils from the GTX platform, similar to other Vaporesso products. With purchase, you’ll get a GTX 0.2ohm mesh coil that operates in the range of 45 to 60 watts and a GTX 3.0ohm mesh coil that fires from 32 to 45 watts. There are many other compatible coil options for MTL and DTL-style vaping, but these won’t be found in the package.
The GTX Pod 26 can hold 5mL of vape juice and is easily refilled by removing the top cap to expose the juice port. Each pod also attaches to the mod through powerful magnets, and you may adjust the dual airflow intakes to control the amount of vapor you produce. Simply rotate the base to do so.
Features & Specifications (Kit)
- Dimensions: 30.8mm x 38.3mm x 130.9mm
- Color options: grey, black, blue, green, red
- 0.96″ TFT display screen
- Full-color UI
- Updated axon chipset
- Integrated 3000mAh battery
- USB-C charging port | 5V/2A
- Adjustable power output: 5W to 80W
- Modes: VW | Pulse | F(t)
- A plethora of safety features
- Optional 510 converter
- 5mL GTX Pod Tank
- DTL vape experience
- GTX 0.3Ω Mesh Coil (32-45W)
- GTX 0.2Ω Mesh Coil (45–60W)
- Effortless refill method
- Transparent to monitor juice level
- Translucent to see e-liquid level
- Adjustable airflow
In The Box
With the purchase of the Vaporesso Target 80 Kit, you will get the Mod, the Pod Tank 26, a GTX 0.2Ω coil, a GTX 0.3Ω coil, a USB-C charging cable, a manual, and a warranty card. Please note that those in the EU will receive the 2mL version of the pod due to strict government regulations.
Similar Products
VOOPOO Drag H80S 80W Pod Mod Kit – Forest Era Edition $23.99
The Voopoo Drag H80S Forest Era Edition Kit features direct-to-lung puffs, a single 18650 battery, fast charging, 80 watts of max output, a 5mL pod, and various modes including smart, RBA, and ECO.Suorin Trident 85W Kit $23.23
It features a single 18650 battery (not included), 85 watts of max power, variable wattage mode, 4.4mL pods, instant firing, an upgraded chipset, a 2 hour USB charging time, dual airflow adjustments, a plethora of safety features and TRI mesh coils.Vandy Vape Rhino 50W 1200mAh VW Pod Kit $17.99
This tiny variable wattage pod system features 50 watts of power from a 1200mAh battery, a lightweight/portable design, an embedded cartridge for incredible appearance, VVC coils for MTL or DTL vaping, a display screen, and a 4mL pod.BP MODS Lightsaber Pod Mod Kit $32.22
This pen-style kit features 18650 and 21700 battery support, USB-C charging cable, a variety of puff styles, 60 watts of max power, an interchangeable sleeve, mesh coils, a 5mL juice capacity, a display, power mode, voltage mode, and bypass mode.Rincoe Jellybox XS 30W 1000mAh Pager-Style Pod Kit $17.99
This pod system features pager style appearance, a Jellybox 2.0 chipset, a 1000mAh integrated battery with a charging port, 30 watts of output, LED lights, and a 2mL cartridge with either an RDL or MTL coil.Rincoe Manto AIO Plus 2 Kit $20.99
This kit features single 18650 battery compatibility, DIY/MTL/DTL pod options, variable output up to 80 watts, a charging interface, a tri-color LED light, multiple safety features, a 3.5mL juice capacity, and an easy refill method.
