Here’s an awesome deal on the Ijoy Cigpet Ant Starter Kit.
The Cigpet Ant is the latest compact starter kit from Ijoy and features up to 80 watts of power, temperature control, a 1.8ml top filled tank and a top loaded battery setup. You can get this kit with a dragon design or in black, silver or red.
The Cigpet looks very similar in design to the Eleaf Pico series of box mod kits. With dimensions of just 47mm x 24mm x 70.8mm, the mod is ultra small, very light and ergonomic due to its rounded edges. The device features three button operation with the square fire button located on the side and the adjustment buttons located on the front under the OLED screen. The display screen shows all the information you could need such as mode, temperature, wattage and more. At the top of the mod, you will find a springloaded 510 connection for easy atomizer installation.
The battery bay is located on one side of the mod and is loaded from the top by unscrewing a ridged cap. The device is powered by a single 18650 battery which can be recharged while in the device via the USB port. The port is also used for upgrading the operating system in case Ijoy releases future firmware upgrades. The mod is capable of 80 watts of power, resistances between 0.06Ω and 3.0Ω and a temperature range of 300 to 600 Fahrenheit. Temperature operation supports nickel, titanium and stainless steel coil heads.
The kit also comes with a 1.8ml Ant sub ohm tank that is easily refilled via a simply top fill system and also features adjustable airflow for a more personalized vape experience. The Ant tank comes with a 0.25Ω coil head which is rated from 40W to 80W.
Overall, if you want a setup that you can easily put in your pocket or purse, the Cigpet Ant Kit may be the kit you should get. It has plenty of power, temperature control and it’s very portable.
Features & Specs.
- Measurements: 47mm x 24mm x 70.8mm
- Ultra compact and portable
- Lightweight and comfortable in hand
- 510 threaded connection with springloaded center pin
- OLED screen
- One-of-a-kind user mode
- Three button operation
- Power range: 5W to 80W
- Resistance range: 0.06Ω to 3.0Ω
- 5 to 80W Power Output
- Temperature control with Ni200, Ti, SS
- Temperature range: 300°F to 600°F or 150°C to 315°C
- Uses a single high drain 18650 battery
- Top loaded battery bay behind screw cap
- 1.8ml e-juice capacity
- Top fill setup
- Adjustable bottom airflow control
- 0.25Ω coil (40 watts to 80 watts)