Here are cheap deals to purchase the Augvape Flash Kit. It features three voltage output settings, an anti-skid design, 18650/20700/21700 battery support, innovative mesh coils, a 5mL juice capacity, easy charging, adjustable airflow control, and USB charging.
Jump To
Deals
Update: This Item Is Out Of Stock Everywhere – Check Similar Tube Mod & Kit Deals Below
Vaporesso GTX Go 40 1500mAh 40W $6.15
Freemax GEMM 80W/2900mAh Kit $13.97
Geekvape AU Aegis U 800mAh 20W Pod Kit $15.39
BP MODS Lightsaber Pod Mod Kit $32.72
Innokin GoMax: 3000mAh/5.5mL Tube Kit $15.25
Freemax Twister 2 80W 3000mAh Kit $34.75
Overview
The Augvape Flash Kit combines the Flash tube mod with the Intake Tank for excellent performance whether you are a beginner or advanced vaper. To ensure a light portable form factor, the mod section of the is made with aluminum alloy which is completed with stylish carvings for a classic appearance. The finish is constructed with anti-skid material to ensure it doesn’t slip from the hands. And, the fire button perfectly integrates into the design.
Powering the Flash Kit or either a 18650, 20700, or 21700 battery, the latter of which will result in the longest possible vape times. You may insert the cell from the bottom by unscrewing an effortless cap and at the top of the mod, there’s a 510 stainless steel connector for use with a variety of atomizers, builds, or tanks.
Around the clicky fire button of the Augvape Flash, you can see a colorful LED that lets you know the current output from the battery. A red LED means voltage is set at 3.5 volts, blue indicates 3.7 volts of output, while green has you firing with 3.8 volts. Changing these modes is as easy as a few clicks of the fire button.
The Intake Tank that comes with the Flash Kit is constructed from stainless steel for durability and hold 5mL of e-liquid, unless you are using the 3.5mL straight tube in the package. To ensure an effortless refill process, the top cap has small ridges so you may instantly remove it to access dual filling slots that work with virtually any refill bottle. Underneath the top cap, you’ll find leakproof adjustable airflow slots that permit a wide open or closed setting.
Perhaps the best aspect of the Flash Kit is that it works with new innovative mesh coils that are highly resistant to corrosion and oxidation for a longer lifespan. In the package, you will find one Super SS 890L coil with mesh heating elements for incredible, tasty vapor production.
Features & Specifications
- Dimensions: 26mm x 142.5mm x 26mm
- Aluminum alloy chassis
- Works with 21700/20700/18650 battery
3 Power Levels: 3.5V, 3.7V, 3.9V - Power button with LED indicator
- Low/high resistance, overheating, short circuit, polarity, over-discharge protection
- 5mL juice capacity
- Threaded top fill method
- Dual adjustable top airflow slots
- 510 threaded connection
- 810 widebore drip tip
- Super SS 890L coils
- Push/pull coil installation
In The Box
