Box Mods & Kits | Pod Kits | Vape Juice | Tanks | Disposables

Augvape VX200 Box Mod $39.99

Posted on
Total Views: 7
Uncategorized

Update: The Augvape VX200 Box Mod Has Been Discontinued – Check  Newer 200W Devices Below Or All Mod/Kits 

Join 60,000 Subcscribers & Never Miss A Vape Deal Again!
We respect your privacy.

The VX200 Mod features a cell phone theme, curved pocket-friendly design, a large fire button, a car dashboard 1.3 inch color screen, hundreds of screen color options, 200 watts of power, five modes (VV, VW, TC, Bypass, TCR), 3 taste modes (normal, soft, high) and firmware upgrades. The VX200 kit comes with 3 disposable Jewel Tanks that feature a 3ml juice capacity, a top fill system, adjustable airflow slots and built-in 0.15 Mesh coil that fires with up to 70 watts of power.

Review

Mod Overview

The Augvape VX200 is made from ABS and plastic, weighs 65 grams and measures 85.5mm x 45mm x 29.2mm. The box mod is available in red, gun metal and black finishes

The appearance of this device was inspired by a mobile phone. As a result, the front panel curves over the side similar to a cell phone with edge-to-edge panels. This also allows for the unit to fit comfortably into your hand.

This mod is also pocket friendly thanks to its weight of only 65 grams and its compact dimensions that allow for easy transportation.

A large fire mechanism spans the entire length of the side of the month making it easy to press. Firing has never been easier.

A large 1.3 inch full color screen with 240 x 240 RGB resolution allows for hundreds of color options for the user interface.

The UI simulates a car dashboard interface that looks exquisite. Vape data such as puff time, mode, wattage, resistance and battery charge levels are displayed in crystal clear fashion.

The VX200 operates in 5 modes. You may set the unit to variable wattage, variable voltage, bypass, temperature control or TCR. The maximum output is 200 watts in power mode or 600 degrees Fahrenheit in temperature control mode down to 0.05ohm atomizer resistance.

Powered by dual 18650 batteries, which are easily access via a magnetic back panel, the circuit was designed with less wire so that current doesn’t have to travel too long of a distance. As a result, the VX200 is efficient when it comes to battery life.

To stay up to date with changes in the vape marketplace, the VX200 Mod’s firmware can be upgraded. This ensures device longevity.

Features & Specifications

VX200 Box Mod

  • Variable Voltage Output
    • 0.5 to 7.2V Output Range
  • Temperature Control
    • 200 to 600 Degrees Fahrenheit
    • Compatible with Titanium, Nickel, Stainless Steel
    • TCR Mode
    • Ohm Lock Mode
  • Variable Wattage Mode
    • 5 to 200W Output Range
    • Three Power Modes
      • Soft
      • Normal
      • High
  • Three Button Control Interface
    • Fire Button Spans The Entire Side
    • Two Adjustment Buttons
  • 1.3 Inch Color Display Screen
    • 240 x 240 Screen Resolution
    • R/G/B Theme Color Chooser (Hundreds Of Colors)
  • Magnetic Battery Panel
    • Uses Dual 18650 Batteries
  • Micro USB Charging
  • ABS and Poly Carbonate Construction
  • Safety Features: Over Heating Protection/Short Circuit Protection/Reverse Polarity Protection/High Resistance Protection/Low Voltage Protection/Over Current Protection
  • Upgrade Firmware

Jewel Tank

  • Dimensions: 25mm x 40mm
  • Made From Poly Carbonate
  • Integrated Mesh Coil
    • 0.15Ω
    • KA1 Mesh Heating Element
    • Recommended at 50W to 70W
    • Recommended At 65W
  • Top Fill Setup
    • Silicone Plug Seal
    • Easy Fill Slot
  • 3ml EJuice Capacity
  • Two 8mm x 2mm Air Intakes Per Side
  • Integrated 8mm Drip Tip
  • 510 Threaded Connection With Gold Plating

In The Box (Kit)

  • Augvape VX200 Box Mod
  • 3 x Augvape Jewel Disposable Tanks
  • USB Charging Cable
  • Warranty Card
Join 60,000 Subcscribers & Never Miss A Vape Deal Again!
We respect your privacy.
Total Views Today: 1  Total Views: 7

cheapvapingdeals

More Posts