Update: The Coil Art DPRO 133 Kit Has Been Discontinued – Check Newer Box Mods & Starter Mod Kits Below
Aspire Feedlink 7mL Squonk Mechanical Box Mod $8.99
Lower Price! Vandy Vape Pulse AIO V2 80-Watt Waterproof RBA Kit $49.99
USA Blowout! Vandy Vape Pulse AIO.5 80W Kit $17.99 – Includes RBA & Pre-Built Tanks
Vandy Vape Pulse V3 95W Squonk Box Mod $31.59
Wotofo Profile 80W/200W Squonk Box Mod $24.99
Vandy Vape Pulse V2 95W TC Squonk Mod $39.99
Wotofo Nudge Squonk Box Mod $13.40
Dovpo Topside Dual 200W TC Squonk Mod $62.91
Check out these cheap deals for the CoilArt DPRO 133 RDA Kit. The mechanical style mod features dual 18650 batteries (installed in parallel), a top display screen, low 0.08ohm resistance capability, lightweight construction, a self adjusting battery contact/pin and a 24K gold plated fire connection. The RDA features a 24K gold plated postless deck, single/dual coil support, a deep juice well, a goon style drip tip and a flavor producing airflow system.
Overview
The CoilArt DPRO 133 kit features both a mod and RDA. The box mod features 133 watts of output (with full battery charge), a large fire button, dual 18650 batteries and a display screen at the top. The DPRO RDA is 24mm wide, has a 24K gold plated postless deck, works with both single and dual coils, has a deep juice well, features an airflow system that enhance vape flavor and includes a Goon style drip tip.
The entire kit has measurements of 47mm x 25mm x 125mm and weighs 150 grams. The mod’s design is basic, but modern, with rounded corners and a large rectangular fire button with “DPRO” emblazonment adds to the appearance and ergonomics. At this time, you can only obtain this full kit in black. At the top of the DPRO 133 box mod, you will see an LED display for easily reading vape data, but information on the exact menu layout is unavailable. Except for the fact that the mod features 133 watts of power, there is no further technical information and there are no details on where the dual 18650 batteries are located. However, by looking at the pictures, we may deduce that the cells are accessed at the bottom.
The DPRO RDA in this kit is made from stainless steel with a postless build deck that is 24K gold plated that works with either single or dual coil builds. The juice well underneath the deck is 3mm deep to prevent frequent dripping. Airflow to the deck is adjustable on the side via dual air intakes and the internal airflow system has an extended length to enhance flavors.
The device measures 24mm x 36mm, comes with a standard & squonk 510 pin, includes a 17mm x 8mm Goon style drip tip that is made with an inner groove to prevent ejuice from coming into the mouth.
CoilArt DPRO 133 Premium Kit Features & Specs
- Kit measurements / weight: 47mm x 25mm x 125mm / 150g
- Mod specifications
- Made from zinc alloy
- Colors: black
- Top LED display
- Maximum output: 200W
- Utilizes dual 18650 batteries
- RDA specifications
- Made from stainless steel
- Colors: black
- Dimensions: 24mm x 36mm
- Innovative postless 24K gold-plated deck
- Single & dual coil compatible
- 3mm deep juice well
- Innovative bottom adjustable airflow
- Dual airslots on chuff cap
- Extended airflow system to maximize flavors
- Includes a extra bottom feeding pin for squonking
- Included 17mm x 8mm Goon style Ultem drip tip
- Inner groove stops e-liquid from entering mouth
- Peek insulation
