Eleaf iStick Mix: Compact 160W Mod With Double sided IML & Resin
Check out these cheap deals for the Eleaf iStick Mix, available as a standalone box mod or full kit with Ello Pop Tank. The iStick Mix Mod features artistic double-sided resin panels, a portable design that is comfortable to hold, dual 18650 batteries, a 2.5A balanced/fast charging system via a an easy Type-C Micro USB port, stable performance, a full temperature control suite including TCR a fast-firing Avatar chipset, a display screen and a plethora of safety features. The Ello Pop in the full vape kit has a 6.5mL capacity, easy refills via a sliding top cap, a childproof structure, dual adjustable air slots and HW coils with self-cleaning technology and best flavor production.
Eleaf iStick Mix Mod Features
The iStick Mix is has two replaceable patterns that are made of resin and are available in hell witch, seabed snaker, skyline numen, glary knight and wind ninja.
The device is created with distinctive in molding label technology. This results in a high-definition exquisite appearance that is also wear resistant.
The unique curved design means the iStick Mix is extremely easy to carry and hold in the hand.
Performance is stable and the device fires lightning fast thanks to an Avatar chipset. This also allows for extremely fast 2.5 amp charging within 1.5 hours. The charging system utilizes balanced technology to ensure equal voltage is achieved in each of the two 18650 batteries.
A unique aspect of the iStick Mix Box Mod is a type -C micro USB port which means it doesn’t matter which way the micro USB cord is inserted.
The iStick Mix utilizes two 18650 cells that are easily accessed by removing one of the resin panels that stays in place due to two large magnets.
Multiple protections include reverse polarity, short circuit, high current, over-discharge and overcharge protection. The device will also cut off if a puff is more than 10 seconds.
Kit w/ Ello Pop Tank
If you decide to get the kit, you will get the Ello Pop atomizer. It works with HW coils which are leak proof and have a self cleaning design. And, a brand new airflow system with porous cotton puts out better flavors. With purchase, you will get the HW-M2 coil and HW-N2 coil, both of which have a 0.2ohm kanthal heating element that fires from 40 to 90 watts.
On the juice reservoir, you will see beautiful silicone rings that match the drip tip’s color and prevent the glass tube from shattering.
eLeaf iStick Mix Features & Specifications
- Dimensions: 52mm x 27mm x 83mm
- Ergonomic and Compact Design
- Powered By Dual 18650 batteries
- Fast Balance 2.5A Charging System
- Max Output: 160W max
- Resistance range: 0.05ohm -3.0ohm
- 510 Threaded Connection
- Artistic Double-Sided Resin
- IML Technology
- Avatar Chipset For Fast Firing & Safety
- Stable Performance
- Multiple Safety Protections
- HW Coils For With New Airflow
- Porous Cotton In Coils For Flavor
- Dual Bottom Adjustable Air Inlets
- Resin Style Drip Tip
- Childproof Top Fill System
- Leak Proof Design
- 6.5mL Juice Capacity
Eleaf iStick Mix Kit Components
In The Box (Kit)
- iStick Mix
- Ello Pop Tank
- 1 x HW-M2 0.2ohm Coil (Pre-installed)
- 1 x HW-N2 0.2ohm Coil
- QC3.0 micro USB Cable (Type C)
- Two manuals
- Two Warning Cards
- Extra Parts
- The Drag utilizes dual external cells and features up to 157 watts of output, a super mode, a wide range of temperature modes and the fastest firing speed in the marketplace.
- This kit features compact design, double-sided resin panels, instant firing, 180 watts of power, dual 18650 batteries, micro USB charging, many operating modes a 5.5ml sub ohm tank w/ top fill system, dual bottom adjustable airflow and mesh coils.
- After the success of the waterproof Vandy Vape AP Kit, the company immediately set out to design another setup that is impervious to water and is also shock resistant.
- This new kit includes a 130 watt mod and the Uforce T2 Tank. The mod features resin panels, an OLED display, the latest 32 bit Gene Fun Chip made in the USA, dual 18650 battery support, a low atomizer resistance at 0.05ohm, 157 watts of power and a wide range of modes including temperature, power, curve, TCR and bypass.
- This setup features a waterproof PCBA, a "find your device" function, a smartphone app, a portable design, replaceable G10 & resin panels, dual 18650 batteries, a wide range of color options, firmware upgrades, micro USB charging, a full color screen, 188 watts of power, an updated Vandy Vape chipset and a multitude of safety protections.
- It features a full color touch screen, a brand new menu system, a password system, 6 screen color options, a screen lock button, an ergonomic fire key, 219 watts of power, versatile temperature control, dual 18650 batteries, a USB charging system, firmware upgrades, multiple protections, a mesh coil, a ceramic coil, a 6ml juice capacity, effortless refills and a resin drip tip.
- The Wismec Luxotic NC features 250 watts of power, multiple protections, resin finishes, dual 18650 or 20700 battery compatibility, optional series/parallel output modes and adjustable voltage up to 8V.
- Check out these cheap deals for the Voopoo/Woody Vapes X217 Box Mod. This device features resin/leather inlays, dual 21700 battery compatibility, a full color 1.3 inch TFT IPS HD screen, a beautiful LED stripe surrounding the front, a GENE.FAN chipset, 217 watts of power, multiple safety protections, micro USB charging, power mode, temperature control and low 0.05ohm atomizer resistance capability.