Here’s a discount for the Joyetech eVic Primo SE Box Mod. Unfortunately, the Joyetech Evic Primo SE is out of stock, but find a newer 80W version of the Primo Kit below.
Jump To
Review
Overview
The eVic Primo SE looks almost identical to the previous eVic Primo Mini. It features a portable form factor, a higher output current, a large OLED screen, effortless use, quick 2A charging, preheat functionality, and a wide range of operating modes.
The eVic Primo SE features Joyetech’s latest firmware and, as a result, is capable of a wide range of modes, including bypass, power, start, 3 x TC (Ni, Ti, SS316), and TCR mode. The maximum output of the SE is 80 watts, the minimum resistance comes in at 0.05ohm, and the temperature can be controlled up to 600 Fahrenheit. Best of all, there’s a pre-heat system to increase the initial wattage when the box mod is engaged. Powering the eVic Primo SE is one 18650 cell that is changed out via a bottom battery cover that easily opens up. At the bottom of the control face, you will find a micro USB port that can recharge the battery quickly because of the mod’s 2 amp fast-charging system.
This small Primo SE weighs only 82.5g and has dimensions of only 25mm x 39mm x 80mm, making it easy to transport. You can get one in silver, red, black, yellow and blue. On the control face, you will find a large OLED with the latest Joyetech menu for easy mod interaction. Vape data is shown vertically, and indicators include battery level, voltage, power/temperature, amps, resistance, and mode. If you prefer to change the screen’s logo, there is functionality built in to do so.
A 510 connection bezel at the top is versatile thanks to a spring-loaded pin that allows for atomizers with a depth of up to 5.5mm or a width of 25mm or less.
Features & Specifications
- Dimensions: 25.0mm x 39.0mm x 80.0mm
- Weight: 82.5g
- Operating modes: power/bypass/start/temp (Ni, Ti, SS316)/TCR (M1, M2, M3)
- Power output range: 1W to 80W
- Temperature range: 200°F to 600°F or 100°C to 315°C
- TC resistance range: 0.05Ω to 1.5Ω
- Bypass/power resistance range: 0.10Ω to 3.5Ω
- Max. output current: 30A
- Preheat system
- Powered by one 18650 battery
- Quick 2 amp charging
- Firmware upgrade capable
- Over-charging protection
- Over-discharging protection
- Over-current protection
- Reverse polarity protection
- Dual circuit protection
- Easily transported
- Comfortable in the hand
- Colors: black, blue, yellow, silver, red
- Larger OLED screen
- RTC clock
- Change screen logo logo
- Spring loaded 510 connection works 25mm wide/5.5mm deep atomizers
Gallery
Comparable Products
Joyetech eGo AIO 2 Kit 1700mAh $11.99
Joyetech eGo Pod 1000mAh Kit $7.99 | AST Version Kit $7.59
Joyetech Exceed Grip Pro 40W/1000mAh VV Pod Kit $22.13
Joyetech eGo AIO 1500mAh Kit $13.99
Joyetech Evio Box Kit $9.79
USA Blowout! Joyetech Batpack AA Battery Mod Starter Kit $4.49