Geekvape Mech Pro Box Mod $19.97


Update: The Geekvape Mech Pro Box Mod Has Been Discontinued – Check  Newer Mod  Deals Below

Join 60,000 Subcscribers & Never Miss A Vape Deal Again!
We respect your privacy.

Check out this deal for the Geekvape Mech Pro Box Mod or Mech Pro Kit with Medusa RDTA.


The Mech Pro Box Mod by Geekvape is the company’s latest mechanical box mod that is built with a hard-wired circuit board, interchangeable face plates and uses either one or two 18650 cells.  Or, you can get the Mech Pro Kit that includes a Medusa RDTA.

Visually, the Mech Pro Mod looks unique and  includes panels on both sides that can be swapped for a personalized style.  The device measures 53mm x 96mm x 25.5mm, is made from zinc alloy with a sprayed finish and is available in black, red or silver.  The firing button is oversized, has a beautiful brass color and slants at a 45 degree angle for easy operation/ergonomics.  To prevent accidental firing, the mechanism can be locked via a physical switch on the side.

When removing the plate covers, the gold-plated brass hardwired circuit system becomes visible. Here you will also find the battery bay that runs on one or two 18650 batteries in parallel to double the amperage and allow for longer battery life.  And, reverse battery protection is built-in to keep your vape experience safe.  The Mech Pro can also fire builds or tanks down to 0.1ohm.

The Medusa  is said to be Geekvape’s flagship RDTA.  It utilizes  simple design, is convenient to refill and has a 3ml  e-juice reservoir.  With a height of only 33mm and an outside diameter of 25mm, the device is also compact.

While the Medusa appears to be an RDA, it’s actually an RDTA (Rebuildable Dripping Tank Atomizer) that can also hold up to 3ml of e-juice.   To add juice, you must remove the threaded shaft section to reveal the e-liquid reservoir.  If used as an RDA, you simply drip e-juice thru the drip tip.

From a design perspective, the Medusa features a streamlined appearance and the premium laser etching throughout adds to the unit’s premium look. At the bottom, you will see a standard 510 connection that is built with an electrically conductive gold-plated pin.

Airflow levels are also adjustable thanks to dual rectangular air  holes on opposite sides of the shaft. To improve vape flavors, the  shaft’s size is smaller than similar RDTAs.

Overall, if you are a vape veteran who loves using mechanical mods and/or coil building, the Geekvape Mech Pro Mod/Kit may be exactly what you are looking for.  This setup is not recommended for vape beginners!

Video Review

Features & Specs

Mech Pro Box Mod

  • Advanced mechanical box mod for mechanical enthusiasts
  • Measurements: 53mm x 96mm x 25.5mm
  • Made from zinc alloy with sprayed finish
  • Colors: black, red, silver
  • Oversized fire button
  • Fire button lock switch
  • Interchangeable cover plates for personal style
  • Visible gold-plated brass hardwired circuit system
  • Utilizes either single or dual 18650 batteries in parallel
  • Reverse polarity protection
  • Resistance range: 0.1Ω to 3.0Ω

Medusa RDTA

  • Dimensions: 24mm x 38mm
  • Outside diameter: 25mm
  • Colors: black, silver
  • Compact with elegant design
  • Use as dripper or tank
  • Tank capacity: 3ml
  • 510 threaded connection with gold plated positive pin
  • 4 x adustable side airflow holes
  • Short shaft for maximum taste
  • Simplified inner structure
  • Dual post deck with two wireholes each


Join 60,000 Subcscribers & Never Miss A Vape Deal Again!
We respect your privacy.

Total Views Today: 1  Total Views: 367