Update: The Innokin MVP4 100W Box Mod Kit Has Been Discontinued – Check Newer Innokin Mods & Kits Or All Mod/Kit Deals
Innokin Endura T22 Pro Kit $27.69
Innokin Kroma 217 Box Mod $24.99
Innokin Kroma-R 80W Box Mod Kit $35.28
Innokin Endura APEX 1800mAh Kit $18.69 to $20.69
Innokin Sensis 3000mAh/40W VW Kit $33.29
Innokin GoZee 60W 2100mAh Box Mod Kit $23.99
New! Innokin EZ Tube Zenith Minimal 40W 2100mAh Mod Kit $23.99
Blowout! Innokin Kroma-Z 3000mAh 40W VW Pod Kit $15.99
Overview
The MVP4 is the follow up to Innokin’s other popular MVP3 Pro Box Mod. The new version features increased power to 100 watts, fast ramp firing, a powerful 4500 mAh internal battery and a suite of safety features.
Inside the MVP4, you will find an Aethon chip board that allows a power range of 6 to 100 watts. The device fires within 0.2 seconds of being activated which works even better if performed in combination with the adjustable pre-boost ramp technology. The box mod is capable of firing in temperature control with a range of 300 to 6o0 degrees Fahrenheit with titanium, stainless steel and nickel coil heads and the lowest atomizer resistance is only 0.1ohm, ensuring further compatibility with almost any atty in the marketplace. And, overpuff, low voltage, short circuit, over discharge and high temperature protections are built into the unit to assure safety while vaping.
To extend vaping times, the mod is built with a massive 4500mAh built-in battery that will minimize the need for recharges. Even if it is necessary to top off the internal cell, it can be done in very little time due to fast 2 amp charging technology that will bring the battery to 100% in no time. Even better is the fact that you can continue vaping while the mod is plugged in.
The control face of the mod is located on the side and features a large firing button at the top, adjustment button & a USB port at the bottom and an OLED screen in the middle. The display shows all the MVP 4’s current statistics such as current temperature/wattage, puff time, coil type, mode, current resistance and the battery’s charge level.
From a design viewpoint, the MVP4 looks very streamlined and is available in blue, white, green, black or red. The device weights 160g and measures 46mm x 92mm x 22mm making it lightweight and portable. The building materials used are zinc/aluminum alloy with a stainnless steel/spring loaded 510 connection that features a 24K gold-plated center pin to optimize voltage transfer.
Video Review
Features & Specs
- Measurements: 46mm x 92mm x 22mm or 1.81″ x 3.62″ x 0.87″
- Weight: 160g or 5.64oz
- Materials: zinc/aluminum alloy
- Stainless steel 510 connection bezel
- Springloaded/24K gold plated center pin
- OLED screen with convenient menu
- Built with Aethon chip board
- Power output range: 6 to 100W
- Temperature control range: 300°F to 600°F
- TC supports: Ni200 / Ti / SS
- Lowest atomizer resistance: 0.1Ω
- 0.2s firing response time
- Adjustable Ramp firing
- Powered by built-in 4500 mAh high capacity battery
- Fast 2A USB charging
- Pass through charging system: vape while charging
- Safe vaping: low voltage, 15 second cutoff, over discharge, short circuit and overheat protections
