Joyetech Cuboid Lite
The Cuboid Lite is a portable mod that features a 1.4 inch full color display, a powerful 3000mAh integrated battery, 80 watts of output, fast 2 amp charging, a real time clock, a nicotine intake calculator and screensaver. The kit included an Exceed D22 Tank with 3.5ml capacity and top fill system.
Design w/ Full Color Display
When first seeing the Cuboid Lite, it seems very similar to the more powerful 200W touch screen version, but with smaller dimensions of 26mm x 41mm x 67mm. This makes the new device comfortable in the hand and also effortless to transport when you leave the house. The unit is available in black, red, yellow, purple or silver with black adjustment buttons that seamlessly integrate into the control face. At the top, there’s a premium 510 connector with a spring-loaded center pin for flush installs of atomizers up to 25mm wide and 5.5mm deep.
In the middle of the front control face, you will see a 1.45 inch TFT color screen that is pleasing to the eye and shows a responsive menu. The main menu displays current mode, voltage, coil resistance, amperage, battery charge level and temperature. A screensaver of your liking can also be uploaded from your computer or you may wish to show a real time clock on your display.
Powerful Battery w/ Fast Charging
Built into the Cuboid Lite Mod, there is a 3000mAh battery that is powerful enough to last all day long at the maximum of 80 watts. The cell is rechargeable via an onboard system that tops off the batteries in a balanced way for safety and that is super fast thanks to a USB charging current of 2.0A. The charging system also features temperature protection: it will stop the process if battery temperature is beyond the safety norm. The USB port is also used in the firmware upgrade process in case a new box mod operating system is released.
Versatile Operation with 80 Watts Of Power
Technically, the Joyetech Cuboid Lite is also quite advanced. In addition to power mode, there’s a bypass mode for vape veterans that enjoy unregulated mods. Temperature control is also built into the unit and works with nickel, titanium & stainless steel. And, there’s a TCR mode with the ability to store your TCR settings in three alternate memory slots. Resistance-wise, this device can fire atomizers down to 0.1ohm in power and bypass modes. During variable temperature operation, the minimum resistance drops down to 0.05ohm. Unique to this mod is also a power limit protection system that is said to protect the atomizer’s coil by limiting the power output and avoid dry puffs. Finally, there are also a number of safety features that protect the mod from over-charging and over-discharging.
Features & Specs
- Dimensions: 26mm x 41mm x 67mm
- Weight: 143g
- Colors: silver, black, red, yellow, purple
- Works with 4.0mm to 5.5mm deep/25mm diameter atomizers
- Large fire mechanism on side
- 1.45 inch full color TFT display with responsive menu
- Real time clock
- Nicotine intake calculator
- Output modes: Power/Bypass/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)
- Power output range: 1W to 80W
- Power mode/bypass resistance range: 0.10Ω to 3.50Ω
- TC resistance range: 0.05Ω to 1.50Ω
- Temperature control range: 100°C to 315°C or 200°F to 600°F
- Maximum output current: 30A
- Maximum ouput voltage: 9V
- Preheat/taste modes
- Massive 3000mAh battery
- 2A micro USB charging
- Balanced charging system
- Charging with temperature protection
- Firmware upgrades
- Dual circuit protection
- Over-charging protection
- Over-discharging protection
- Auto-shutdown protection
- Power limit protection system