Update: The Snowwolf O-100 Squonk Mod Kit Has Been Discontinued – Check Newer Squonk Kit & Mod Deals Or All Mod/Kit Deals
Here are cheap deals for the Snowwolf O-100 Squonk Mod Kit 100W. This starter kit features tons of power, accurate operation including temperature control, beautiful finishes, a 7ml squonk bottle, fast 2.5 amp charging and accepts a 21700, 20700 or 18650 battery.
Available in gold black prism, gold red prism, gold blossom and gold azure, the mod in the 0-100 Squonk Kit features visually striking engravings, a gold panel and also a resin dyed panel that can be swapped out. The 0-100 Box Mod also has compact measurements of 83mm x 54.5mm x 28.4mm. At the top, you will see a 19mm springloaded 510 connection that is also gold plated for electrical conductivity. In addition to a large fire button, the side control face is made with a 0.91 inch OLED display that has indicators for current wattage or temperature, voltage output, battery life, current atomizer resistance, puff time and puff counts, all displayed on a colored background for an exquisite appearance.
Powering the squonker is a single battery which is easily accessed by removing the back panel which also reveals the 7ml squonk bottle that features an easy refill system. The micro USB charging system located on the control face tops of the cell at a lightning fast 2.5 amp charge rate, so recharges of the 21700, 20700 or 18650 you have inserted should take almost no time.
On the technical level, the Snowwolf 0-100 Squonker is quite capable with a full temperature control suite that works with stainless steel, titanium and nickel heating elements as well as TCR functionality. Temperature tops out at 570 degrees Fahrenheit, power mode can achieve 100 watts while the 0-100 is compatible with atomizers that have a resistance range from 0.1 to 3ohm. The Snowwolf 0-100 Kit also comes with a BF RDA. It measures 24mm across, has dual 7mm x 2mm adjustable air inlets and includes a 9mm wide bore Delrin drip tip. The deck is made with dual posts that have a single 3mm wide wire hole each and PEEK insulation to resist heat. Underneath the deck, the juice well’s depth comes in a 5mm for long vape times.
With purchase of the Snowwolf 0-100 Squonk Mod Kit, you will also receive a bag of extra parts, a micro USB charging cable, cotton, a pair of coils, a screwdriver a 60ml e-liquid plastic bottle for dripping, a warranty card and a manual.
Snowwolf O-100 Squonk Kit Features & Specifications
- Dimensions: 83mm * 54.5mm * 28.4mm
- Made from zinc alloy fram with resin dyed panel
- Can be swapped out for new look
- Beautiful Snowwolf engravings
- 510 threaded gold plated/springloaded connection bezel
- 7ml internal squonk bottle
- Works with 18650/21700/20700 Battery
- Fast 2.5A micro USB charging system
- Easy battery access
- Power output range: 10-100W
- Voltage output range: 1-7.5V
- Max output current: 25A
- Atomizer Resistance Range: 0.05-3.0ohm
- Temperature Control Range: 212-572 Fahrenheit
- Dual bottom adjustable air slots
- Gold plated BF 510 connection pin on RDA
- Dual post deck
- 3mm wire terminal on each post for large/intricate builds
- Lots of build space
- PEEK Insulation
- Single coil compatibile
- 5mm deep juice well
Snowwolf 0-100 Pictures