Check out these discounts for the Stentorian AT-7 Box Mod. With beautiful transparent panels, circuit board LED lights and powerful internal battery, this mod looks to be amazing.
-
USA Deal: $31.50
Use coupon code MyVpro10at checkout
AT-7 Box Mod Review
Overview
The Stentorian AT-7 Box Mod has an amazing design that is inspired by a water cooled gaming computer. It features transparent panels, circuit board LEDs, an American chip board, solid materials, a powerful 3500mAh integrated battery, 100 watts of power, many safety protections and instant firing.
In designing the AT-7, Stentorian has mimicked a computer case that is transparent on the front and back. In fact, LED lights can be seen surrounding the circuit boards that light up when firing, just as you would see on a gaming PC. Inspired by Egames, this unregulated mod looks like it has a water cooled chassis that seems to utilize a brass radiating tube to circulate water and keep everything cool. Unfortunately, while this may be a unique look, this is not actually a water cooled mod. With measurements of 74mm x 90mm x 32mm, the mod is portable and is available in white, black and red. A huge fire switch spans the entire side of the mod for easy firing and ergonomic use.
The circuit board on the American made AT chipset is larger to expand the radiating surface and features a unique booster on the PCB to keep stable output voltage and wattage. With 35A consistent output, this mod is said to always fire without delay with any atomizer, build or tank with a resistance of 0.1ohm or higher. Best of all, a unique adaptive power function detects the coil’s resistance and will adjust power automatically.
An integrated Li-PO battery is built into the AT-7. This battery has a massive capacity of 3500mAh so it will last quite a while, even at the highest output of 100 watts. The cell is recharged via the USB port thanks to an onboard charging system that will finish the process in less than 2 hours. A battery LED on the front allows for monitoring the charge level. And, the AT-7 Box Mod has plenty of protections including low voltage warning, overheat protection, short circuit protection, low resistance protection, overpuff protection, over charging protection and over output voltage protection.
Features & Specs
- Measurements: 74mm x 90mm x 32mm
- Inspired by water-cooled gaming PC
- Transparent glass front/back
- LED
- Water cooling inspired brass radiating tubes
- Durable design
- Colors: red, black, white
- AT logo with three colors
- 510 threaded connection
- Huge fire switch
- 510 connector
- 3500mAh built-in battery
- Long vaping times
- Micro USB charging
- 2 hour charge time
- American made AT chip board
- Adaptive smart power output
- 35A stable output
- No delay firing
- Super large PCB
- Unique booster on circuits
- Power output: 100W max
- Max voltage output: 4.2V
- Power mode resistance range: 0.1Ω to 3.0Ω
- Adjust output based on coil resistance
- Safety protections
- Overheat
- Short circuit
- Over-charge
- Over-puff
- Over output voltage
- Low resistance
- Low voltage
Pictures
