Update: The Terminator 75W TC Squonker Kit Has Been Discontinued – Check Newer Squonk Kit & Mod Deals Or All Mod/Kit Deals
Wismec Luxotic Surface 80W TC Squonk Mod $26.79
Blowout! Vandy Vape Pulse AIO w/ Standard Pod & RBA Pod $24.64
Vandy Vape Pulse V2 95W TC Squonk Mod $39.99
Lost Vape Centaurus Quest BF: 100W TC Squonk Box Mod 55.49 | RDA Kit $71.99
Dovpo Pump Squonker Mechanical Box Mod $71.99
BP MODS Tomahawk SBS 60 Watt TC Squonker Box Mod $57.99
Wotofo Profile 80W/200W Squonk Box Mod $32.99
Eleaf iStick Pico Squeeze 2 100W TC Squonk RDA Kit 34.99
The Terminator 75W is a new squonker kit that is built with an internal 10ml e-juice bottle, utilizes a single 18650 and features an intelligent e-juice pump that auto-refills the RDA for convenience. The unit can be powered in several temperature control modes, power modes, TCR, bypass mode and has a maximum output of 75 watts.
A squonker mod provides e-liquid to the RDA from an internal bottle via a small hose. In this case, the tank inside the Terminator can be accessed at the back of the device, has a massive 10ml capacity and is refilled by unscrewing a convenient cap at the bottom. What’s really unique about this setup is that a motorized pump automatically takes care of refilling the RDA to make squonking easier than ever. To see this process, watch the video below.
The unit uses a single 18650 battery for power that is installed next to the squonk bottle and can be recharged via USB at a fast 2 amp current. The device has a wide range of operating modes including power, power-T, bypass, temp-T, TCR and three temperature control modes for nickel, titanium and stainless steel. Output tops out at 75 watts while the maximum temperature is 600 Fahrenheit, the minimum resistance is 0.05ohm in temperature modes and 0.10ohm in power/bypass modes.
On the control face, you will see the bright OLED that has a convenient vertical menu that shows wattage/temperature, voltage, resistance, puff time and battery level. The fire button is square, the adjustment buttons are at the bottom and a one-of-a-kind rectangular button activates the e-juice pump.
Visually, the Terminator Kit looks streamlined and modern with curved corners on a black chassis. The mod’s measurements come in at 61mm x 35mm x 90mm while the RDA has dimensions of 24mm x 39.5mm. A 510 spring loaded connection bezel allows for installation of any RDA.
With purchase, you will receive the Terminator Squonker, RDA, a USB charging cable, an accessories bag, a warranty, an operating manual and a gift box.
Terminator Squonker Kit Video
Terminator Squonker Kit Features & Specifications
- All-In-One Squonker Kit
- Patented design
- Leak proof
- Internal 10ml e-juice bottle
- Easy fill
- “Medical standard” motorized e-juice pump
- Operating modes: Power, power-t, bypass, TC Ni, TC Ti, TC SS, temp-t, TCR
- Power output range: 1W to 75W
- Power/bypass mode resistance range: 0.10Ω to 3.0Ω
- TC mode resistance range: 0.05Ω to 1.5Ω
- Temperature range: 200°F-600°F or 100℃-315℃
- Uses single 18650
- Fast 5V, 2A micro USB charging
- Mod measurements: 61mm x 35mm x 90mm
- RDA measurements: 24mm x 39.5mm
- Dual post deck
- 510 Spring loaded connector
- OLED screen with vertical menu