Check out these cheap deals for the Tesla CP Couples Starter Kit. This vape kit is outdated, so check newer 220-watt box mods.
Tesla CP Couples Overview
Similar to the Tesla Biturbo Kit, the double barrel CP Couples Kit looks like it will be popular because of its unique ability to vape two RDAs with two separate flavors simultaneously or just one. This kit features a unique connector bridge for the RDTAs, dual 18650 batteries compatibility, compact size, a box mod chipset that allows operating one or both RDAs, 110 watts of power, a bottom battery bay, taste modes, versatile temperature control and support for nickel, titanium, and stainless steel heating elements.
With dimensions of 94mm x 55mm x 28mm and made from zinc alloy with polycarbonate, the CP couples mod is built with CNC metal side panels and can be purchased in gunmetal or rainbow colors. At the top of the device, you will see a gold-plated 510 atomizer bezel that features a springloaded center pin for flush atty installs and is compatible with atomizers with a diameter of 26mm or less. The square fire button is located on the front control face, which is also built with dual adjustment buttons and a micro USB port at the bottom. In between, you will see a 0.96-inch OLED display with dual menus allowing control of the left, right, or both installed RDAs. On each menu, you will see indicators for current power, current mode, current voltage, and current taste mode. There are also battery bars to monitor the charge level of the dual 18650 batteries that are bottom loaded by removing a sliding door for easy swapping. The cells are recharged at a 1.5 amp rate via the micro USB port, or you may use an external charger.
Technically, the Tesla CP Couples Box Mod in this kit can operate in the following modes: power, TCR, and temperature control with nickel, titanium, and stainless steel compatible atomizer coils. Also, normal, soft & hard taste modes and settings can be stored in three memory slots. The maximum power of the CP Couples comes in at a massive 220 watts, resistance bottoms out at 0.05ohm, and the highest temperature capability is 600 Fahrenheit or 300 degrees Celsius. Many safety features include intelligent atomizer recognition, high voltage protection, low voltage protection, high resistance protection, low resistance protection, short circuit protection, and reverse battery protection.
At the top of this setup, you will see dual CP Couple RDTAs. They have an 8ml capacity and look to be refilled via a center hole in the middle of the deck. The dual post deck is built with dual terminals on each, and wire is held in place via side-mounted screws. Connecting the two RDTAs at the top is a removable connector bridge, so you can combine flavors or choose to vape only one RDTA at a time via the settings on the mod.
Features & Specifications
- Box mod measurements: 94mm x 55mm x 28mm
- Full kit measurements: 125mm x 55mm x 28mm
- Full kit weight: 295g
- Made from zinc alloy with polycarbonate
- CNC twisted metal faceplates
- Colors: rainbow, gunmetal
- Dual springloaded 510 connectors
- Front fire button
- 0.96″ OLED display
- Dual split menus (one for each RDTA)
- Battery bars
- Utilizes dual 18650 batteries
- Bottom loaded
- Sliding battery door
- Micro USB charging port: 1.5A system
- Operating modes: Power, TC-Ni, TC-SS, TC-Ti, TCR
- Taste modes: normal, soft, hard
- Power range: 7W to 220W
- Power mode / Temperature Control resistance: 0.10Ω to 3.0Ω / 0.05Ω to 1.0Ω
- Max voltage: 8.5V
- Temperature range: 200°F-600°F or 100°C to 300°
- Safety protections
- Short circuit
- High resistance
- Low resistance
- Reverse polarity
- High voltage
- Low voltage
- Intelligent atomizer detection
- RDTA
- 8ml juice capacity
- Dual post deck
- Dual wire holes per post
- Connector bridge
- With purchase
- CP Couples Mod
- Two CP Couples RDTAs
- 4 x 0.3ohm wire
- Wrench
- Eight screws
- Twelve silicone rings
- Organic cotton
- Manual
