Uwell Hypercar Mod Kit 80W $26.00 (USA)

Here are cheap deals for the Uwell Hypercar Mod Kit 80W.  This new vape kit features a car themed appearance, portability, a silicone fire button, single 18650 battery compatibility, 80 watts of power, temperature control, bypass mode, a wide range of safety features, a 3.5ml juice capacity and an effortless top fill method.

  • USA Deal: SS Kit Only $26.00 get-this-deal Limited supplies


The Uwell Hypercar kit consists of a mod and whirl tank. The mod is constructed from zinc alloy, has dimensions of 85.7mm x 44.2mm x 25.7mm and is available in black, red, gold, silver and sapphire blue colors. The design incorporates a “supercar” theme that includes a streamlined appearance and ergonomics. On the control face, you will see a 45 degree angled fire button that is made of silicone for comfortable clicking. Underneath, there’s a display screen and at the bottom of the control face, you will see a micro USB charging port that recharges the single 18650 cell in the battery bay whenever the mod needs to be plugged in.

In the operation department, the Hypercar is capable of 80 watts of power and can operate in power mode, temperature control with nickel mode, temperature control with titanium mode and bypass mode. The Uwell Hypercar will work with any atomizer with a 510 threaded connection and of which the coil’s heating element fires from 0.1 to 3ohm. Temperature control tops out at 600 degrees Fahrenheit or 315 Celsius. Multiple safety features are built into this kit and include low power alert, reverse battery protection, short circuit protection, resistance etection and temperature protection.

Also included in the Uwell Hypercar kit is the Whirl Atomizer. It matches the color scheme of the Hypercar mod, is made from zinc alloy with quartz glass and has measurements that come in at 24.2mm x 36.3mm. The juice reservoir can hold up to 3.5ml of e-liquid and is refilled via a top fill design. It is uncertain where the airflow control or air inlets are located so we will update this page when the information is available.

Inside the Whirl Tank, you will see either a 0.6ohm Nichrome dual coil that has a range of 18 to 22 watts. Or, you may opt to install the included nicotine salt compatible 1.8ohm coil that has a rating of 10 to 15 watts.

With purchase of the Hypercar by Uwell, you will also receive an extra quartz glass tube, two coils, a pack of replacement o-rings, a micro USB charging cable, a manual and a drip tip cover to keep dust and debris out of the tank.

Uwell Hypercar Features & Specifications

  • Mod material: Zinc Alloy
  • Mod dimensions: 85.7mm x 44.2 x 25.7mm
  • Whirl tank material: SS & Quartz glass
  • Whirl tank dimensions: 24.2mm x 46.3mm
  • Car themed mod and tank
  • Ergonomic/streamlined design
  • Pocket-sized
  • Silicone fire button for comfort
  • Operating modes: bypass, power, TC-Ni, TC SS
  • Power range: 5-80W
  • Standby current: <50uA
  • Voltage range: 0.7-8.0V
  • Resistance range: 0.1-3?
  • Temperature range: 200-600? / 100-315?
  • Utilizes a single 18650 battery
  • Micro USB charging system
  • Safety features
  • Low power alert
  • Overcharge protection
  • Reverse battery protection
  • Temperature protection
  • Resistance detection
  • Short-circuit protection
  • Tank capacity: 3.5ml
  • Top fill system
  • Included coils
    • NiChrome Dual coil 0.6Ω= 18-22W
    • NiChrome Single coil 1.8Ω=10-15W
Join 60,000 Subcscribers & Never Miss A Vape Deal Again!
We respect your privacy.
Total Views Today: 1  Total Views: 431