Uwell Whirl 2 100W TC Kit $22.56

Here’s a cheap deal to purchase the Uwell Whirl 2 Kit. The mod features 18540/20700/21700 battery support, fast firing, 100 watts of power, bypass mode, power mode, TCR mode, three temperature control modes, 2 amp fast charging, and a wide range of safety protections. The kit includes a tank with a 3.5mL capacity, an easy top-fill method, a DTL coil, an MTL coil, and adjustable airflow control. This kit is for sale in black/red, black, blue, or silver. Unfortunately, this kit is old and no longer available, so check out our newer vape kit deals.

Jump To

Uwell Whirl 2 Box Mod

The Uwell Whirl 2 Mod works with three different types of batteries, including a 21700 cell that should result in long vape times at the maximum 100-watt setting. However, when using a smaller 18650 battery, you’ll need to insert the included battery sleeve into the battery bay, accessible by a flip cover at the bottom. A 2 amp micro USB charging system at the bottom of the control face permits a fast recharging process, and you’ll find a compatible cable in the package.

Inside the mod, a moisture-proof chipset effectively protects the electronics, so you can feel safe using this setup in rainy or dusty environments. Moreover, the chipset permits fast 0.008-second firing and a safe vape experience thanks to six protections. These include high temperature, short circuit, over-discharge, reverse polarity, and over-puff protection. And, for versatility, the chipboard allows operation in bypass, temperature control, variable wattage, and TCR modes.

With dimensions of 87mm by 35mm by 29.6mm and a zinc alloy chassis, the mod is both small and lightweight for easy transportation. At the top, there’s a 510 connector, while the battery bay can be accessed at the bottom, as previously discussed. On the mod’s control face, you can see a 0.69″ OLED display screen with monochrome UI and vape indicators that include the current mode, the current wattage/temperature, the current voltage, and the atomizer coil resistance, a battery bar, and battery percentage. To navigate the menu, there are three buttons and a select button in the middle. This means setting adjustments and menu navigation are straightforward.

Uwell Whirl 2 Kit

If you purchase the Whirl II Kit, you’ll receive a tank with a 3.5mL juice capacity and a smooth refill system. To add juice, unscrew the top cap to uncover a decent-size port. Moreover, the kit can be used as a mouth-to-lung or direct-to-lung vape system by adjusting two bottom airflow slots with two coil options. If you enjoy a nicotine salt style MTL vape, install the included Single Nichrome 1.8ohm coil that operates from 10 to 15 watts. Open the air slots for DTL vaping and install the Dual Nichrome 0.6ohm coil that works from 18 to 22 watts. Finally, there’s no intricate or messy coil installation process, as the coils can be easily pushed in or pulled out.

Features & Specifications

Mod

Colors: silver, red, blue, black
Dimensions: 87mm x 35mm x 29.6mm
Made from zinc alloy
510 threaded connection
OLED display screen
Easy menu navigation
LED indicates the working status
Works with 21700/20700/18650 Battery
Operating modes: VW, TC (NI200, SS, TI), TCR, BYPASS
Power output range:5-100W
Atomizer resistance range: 0.1-3.0Ω (VW); 0.1-1.0Ω (TC)
Temperature control range: 200°-600°F / 100°-315°C
0.008s fast firing
2A fast charging micro USB interface
Water-resistant chipset
Safety protections
- High temperature
- Over-discharge
- Overcharge
- Reverse polarity
- Overpuff

Kit

Dimensions: 25mm x 46mm
SS chassis
Pyrex glass tube
Tank capacity: 3.5ml
Top filling
Dual Nichrome 0.6ohm Coil (18-22W)
Single Nichrome 1.8ohm Coil (10-15W)
510 threaded connection
Adjustable airflow control

In The Package

In addition to the mod, you will receive a 18650 battery adapter, a micro USB charging cable, a warranty, and a manual. The kit includes the 3.5mL tank, a 1.8ohm nic salt coil, a 0.6ohm sub-ohm coil, a drip tip cover, an extra glass tube, and a pack of replacement o-rings.