Here are cheap deals for the Vaporesso Armour Pro 100W Box Mod Kit. This 100 watt mini mod with full color display has an Omniboard 4.0 chip board so it has virtually any operating mode you can think of including variable voltage, bypass, TCR, variable wattage, versatile temperature control and tons of curve modes. And, the minimum resistance is an amazingly low 0.03Ω while the firing response time is almost instant at just 0.002s.
The Vaporesso Armour Pro features 100 watts of power, 21700/20700/18650 battery compatibility, fast charging, a full color display, fast 0.002 second firing, power/temperature curve modes and a very low 0.03 minimum resistance.
Design-wise, this zinc alloy mod was made to be very portable with measurements of only 86mm x 38.5mm x 27mm. On the front control face, you will see a large 0.96 inch full color display that features a modern menu with a battery bar, current mode, wattage/temperature, resistance, voltage, puff number and time. The fire button and screen are combined into one for a fully integrated appearanceand easy firing. Underneath the screen/fire button, there are three adjustment buttons to easily select items on the menu with a third select button. Powering the Armour Pro Mod is either a single 18650, 20700 or 21700 battery.
With a 21700 battery installed, you will achieve much longer vape times due to its 4800mAh capacity. The battery charging system is lightning fast at 2 amps and occurs via the micro USB port. Inside the Vaporesso Armour Pro Box Mod, you will find an advanced Omniboard 4.0 chipset which utilizes an advanced operating system with a wide range of modes. You can use the device in these modes: power mode (H/N/S), temperature mode (SS, Ni, Ti), TCR, Bypass, CCT, CCW, variable voltage and CCV. CCT, CCW and CCV allows for entering your ideal initial firing voltage/wattage/temperature and let it wind down over time for a really customized vape. You may also save your favorite settings in two memory slots for easy access anytime you need them. For maximum compatibility with almost all atomizers in the marketplace, the Armour Pro fires all the way down to an amazingly low 0.03ohm. And, there are multiple protections built into the OS to ensure a safe vape experience.
Armour Pro Mod Features & Specifications
- Dimensions: 38.5 x 27 x 91.4mm
- Made from zinc alloy
- Full color display integrated with fire button
- Omniboard 4.0
- Fires with 0.002s
- Output Wattage: 5-100W
- Resistance Range: 0.03?-5?
- Single Battery: 21700/20700/18650
- Fast 2A charging system
- Charging Current: 2A
- Output Modes: Smart VW(H/N/S)/VT(SS, Ni, Ti)/ TCR(M1, M2) / BYPASS / CCT / CCW/VV / CCV
- Multiple safety protections