Update: The Artery Nugget X 50W Box Mod Has Been Discontinued – Check Newer Mini Box Mod & Kit Deals Or All Mod/Kit Deals
Blowout! Vaporesso Moti X Mini 1150mAh 29W Pod Kit $12.99
GeekVape M100 Box Mod $35.49 | M100 Kit $42.29
New! Freemax Maxus 2 200W Kit w/ 5mL M Pro 3 Tank $45.99
Blowout! Lost Vape Centaurus Q80 80W Pod Mod Kit $24.87
Eleaf iStick Pico Plus Mod $19.99 | Kit $29.99
Vaporesso Gen PT60 60W Kit $22.11 | PT80 S 80W Kit $28.35
YiHi SXmini SX Nano Auto Squonk Kit $20.77
Moti Play Mini Pod Kit 650mAh $9.19
Overview
The Artery Nugget X is comprised of a 50 watt mod and the Artery AT22 Tank. The mod looks to be easy to hold in the palm of the hand and is quite portable thanks to dimensions of just 58 x 36.6 x 23mm. On the control face, you will find a 0.96 inch OLED display that has vape data such as current power/temperature output, atomizer resistance, battery charge level indicator and puff counts. Above the screen, there’s an oversized fire button for easy mod operation, while a stainless steel 510 threaded atomizer bezel is located at the top. The pin on the connector is gold-plated so you can be sure it will provide efficient power to the tank.
Powering the compact Nugget X is an integrated 2000mAh battery. It is charged via the micro USB port that features battery charging protection and a 1.5A rate of charge to finish the process very quickly. On the technical level, the Artery Nugget Box Mod can operate in the following modes: variable wattage, variable voltage, temperature control with nickel, temperature control with stainless steel, temperature control with titanium, bypass and TCR. Additionally, you may store your personalized settings in any of the three memory slots. Wattage tops out at 50 watts, but the maximum temperature capability and lowest resistance is unavailable. In addition to the previously mentioned battery protection, the Nugget X by Artery also features low voltage, atomizer short, check atomizer and no output safety protections.
Included in the Artery Nugget X Starter Kit is the AT22 Tank. This atomizer is made from stainless steel with glass. Its juice reservoir that can hold up to 2ml of e-liquid and utilizes a top fill system for refills. Airflow on the tank is adjustable at the bottom via 12mm x 2mm air intakes that can be fully closed off. Inside the tank, you will see the AL1B Coil that is made with a heating element that has a resistance of 1ohm. The head fires in the range of 25 to 45 watts and is made with organic cotton for perfect flavors in a safe setup. With purchase, you will receive a 9mm wide bore drip tip that is made with Delrin to resist heat. And you’ll also get spare parts, two coils, a warranty card, a warning card, a charging cable and a manual.
