Asmodus Microkin: 1100mAh/2mL Lightweight Kit
The Asmodus Microkin features portable design, a lanyard mounting point, lightweight construction, an 1100mAh integrated battery, three voltage settings, an LED, fast charging, a pod with 1.0ohm coil and a pod with a 1.2ohm ceramic coil for flavorful vapor from nicotine salt or high nicotine e-liquids.
With dimensions of only 45mm x 39.9mm x 24.25mm and lightweight polymer construction, this pod system is compact and lightweight. Although it is uncertain if a lanyard is included in the box, the device does have a mounting point in case you already have one. The chassis is made from high quality plastic and the finish options are black carbon fiber, black and white, green and red or white carbon fiber.
1100mAh Integrated Lipo Battery
Inside the Microkin, you will find an 1100mAh capacity battery for long vaping times. This pod system can operate with three voltage output settings which are indicated via an LED. The green settings means output is at 3.2 volts, red at 3.4 volts and blue at 3.6 volts. A myriad of safety features include low voltage, short circuit, overheat, over-voltage and overcharge protections.
2mL Refillable Pods
The Asmodus Microkin operates with two pod options, both of which have visible e-juice level, a side fill system and a 2mL juice capacity. One of the pods in the package utilizes a 1.0ohm dual coil and the other has a ceramic coil with a 1.2ohm resistance. Therefore, this kit is best used with high nicotine or nicotine salt-based e-liquids.
Features & Specifications
- Size: 40.4mm x 25mm x 56.7mm
- 1100mAh Integrated Battery
- Plastic Chassis
- Pod Capacity: 2ml
- Micro-USBCharging Port
- RGB LED For Battery Levevl & Voltage Settings
- Max Output Voltage: 3.6V
- Input Voltage Range: 3.6-4.2V
- Side Fill Method
- Three- Voltage Output Levels
- Coil Type: 1.0ohm Dual Coil / 1.2ohm Ceramic Coil
- Visible E-Juice Level
- Lots Of Safety Protections
- Adjustable three-level output
- With a Lanyard Hole, Easy to Carry
- This kit features LEDs that light up the entire kit, 2500 total puffs, an integrated 1300mAh battery, 6mL pre-filled pods, and 13 different flavors.
- This new mod kit is compatible with pods, RDTAs, RDAs, and sub-ohm tanks. It also features 100 watts of power, a temperature mode, variable wattage, a color TFT display with 4 theme options, fast response time, refillable pods, lightning-fast charging, 6mL juice capacity, adjustable airflow control, and a shock, dust, and waterproof design.
- This disposable pod kit features 1500 puffs, draw-activated firing, 3.5mL pods with 5% nic salt vape juice, and ultra-portability.
- The Vaporesso Target PM80 is the latest variable wattage pod system in the marketplace and looks to be very similar to the RPM40 and RPM80 by Smok. The Target PM80 features a small design, an integrated 2000mAh battery, variable wattage operation in the range of 5 to 80 watts, a 0.96 inch display, 2 amp fast charging, mesh coils and exquisite finishes.
- This new mod pod kit features single 18650 battery support, 4mL capacity cartridges, mesh or Nicr coils, type-C fast charging, 80 watts of variable power, and a 0.96 inch full color TFT display screen. Best of all, you may use the mod with your favorite tank or atomizer with a 510 adaptor (Version 2 kit) or separately buy the R80 RBA head for DIY fun.
- This disposable vape pen features 1600 puffs, 4mL of synthetic nicotine salt e-liquid, 50mg nic strength, a 700mAh battery, and many flavors.
- The Thelema Quest features 200 watts of power from dual 18650 batteries, tons of modes including temperature control, a full-color display, triple adjustment buttons for easy menu navigation, 3 memory slots, fast charging, a 5mL juice capacity, triple airflow slots, and an effortless side filling slot.
- The RPM160 features a brand new chipset, 160 watts of power, fast firing, 5mL pods, a full-color display screen, several protections, easy refills, and an exquisite design.