Update: The Cloupor X3 80W TC Box Mod Kit Has Been Discontinued – Check Newer 80W Box Mod & Kit Discounts Below
Last Chance! Voopoo Drag X Pro 100W Kit $10.55
Digiflavor Z1 SBS 80W Mod Kit $37.80
Eleaf iStick Power Mono 3500mAh 80W Mod $23.99 | iStick Power Mono Kit $31.99
VOOPOO Drag H80S 80W Pod Mod Kit – Forest Era Edition $23.99
New! Lost Vape Centaurus B80 AIO Kit $40.59
New! Vaporesso Gen SE 80W Box Mod $32.79 | Gen SE Kit $41.99
Blowout! Lost Vape Centaurus Q80 80W Pod Mod Kit $21.76
Smok RPM 5 80W/2000mAh $26.99 | Smok RPM5 Pro 80W/18650 Pod Kit $23.12
Overview
The Cloupor X3 kit included both the X3 box mod and X3 tank. The mod is portable, capable of 80W of ouput power, accurate temperature control and the tank can hold up to 4ml of e-liquid, is top-filled and works with a wide range of coils, including RBA head.
The kit features a unique design and has excellent build quality. It has dimensions of just 36mm x 32mm x 82mm, so it is very small and quite portable. It is also lightweight and has a glossy paint finish to make it ergonomic.
The X3 tank has a 4ml e-juice capacity and is easily refilled with a top fill system. Just unscrew the top cap and add e-liquid! The tank has a wide array of coil heads available including 0.3Ω kanthal dual coils, 0.5Ω stainless steel TC coils, 0.5Ω titanium TC coils and 0.5Ω Clapton coils. Or, if you’re into building, there’s an RBA head available that is said to be simple to work with. The tank comes with a Delrin drip tip which is highly resistant to heat and provides improved vape flavor.
While the X3 box mod is very portable, it is still capable of putting out 80 watts of power, which is probably enough for any device that was designed to be used while on the go. The mod features smart temperature control technology which is compatible with stainless steel, nickel and titanium coil heads. For more seasoned vapers, there’s also a TCR mode with which you can set the temperature coefficient of resistance for the most precise vaping. Temperature can be controlled from 200 to 600 degrees Fahrenheit and atomizers can have a resistance as low as 0.1Ω. Cloupor also claims that their newer technology prevents burnt or dry hits.
The mod is powered by a single 18650 battery which can be charged either by the USB port or you can remove the cell and charge it externally. The battery is stored behind a magnetic cover on the back of the device.
Features
Cloupor X3 Box Mod
- Dimensions: 82mm x 36mm x 22mm
- Stainless steel threaded 510 connection
- Spring-loaded/gold plated center pin
- Modes: VW / TC Ni / TC Ti / TC SS / TCR
- Power range: 1W to 80W
- Atomizer resistance range: 0.1Ω to 3.0Ω
- Output voltage range: 0.5V to 8.0V
- Temperature range: 200°F to 600°F or 100°C to 300°C
- Full Smart Temperature Control
- Utilizes a single 18650 battery cell
- Magnetic battery cover
- USB charging
- Safety features: short circuit, over puff, low battery, battery imbalance, low power and low resistance protections
Cloupor X3 Tank
- Dimensions: 42.5mm x 22mm
- Delrin drip tip
- Top fill system
- Tank capacity: 4ml
- Easy assemble/disassemble for cleaning & maintenance
- Wide range of Japanese organic coil heads available
- 0.3Ω Kanthal A1 dual coils
- 0.5Ω SS316L coil head
- 0.5Ω Claptopn coilhead
- 0.5Ω Titanium coil head
- 0.5Ω pre-built RBA coil
Video (Japanese)