iJoy Mercury: 1100mAh/12W Resin Kit w/ 2mL Internal Tank
The iJoy Mercury is an all-in-one vape system that features a 1000mAh integrated battery, 10W of power, exquisite resin finishes, a 2mL juice capacity, a Mercury mesh coil pre-installed, an extra coil included, and adjustable airflow control.
What stands out about the design is the carefully crafted resin material and resin mouthpiece which allow the Mercury to look sleek. The device is also portable, similar to a pod style vape kit, so it is ideal for when you are out and about.
Powered by an integrated 1100mAh battery, charging is convenient via a USB port on the control face. Output from the built-in battery is a constant 10 watts and will result in longer than ever vapae times.
The Mercury has intelligent indicator lights on its side. Three of these LED lights indicate the battery’s charge level, while the other shows the different working conditions of the device. When the battery level is above 70%, the device will have 3 lights turned on, 2 LED lights means the charge level is above 35% while one light means it’s time for a recharge.
To add juice to the internal 2mL reservoir, all you do is unscrew the resin top cap, pour out the cartridge and add e-liquid thru its stop. It is important to always properly prime the coil after a refill so that it becomes fully saturated and to avoid damage.
You may adjust the airflow on the inserted cartridge. It is quite easy to do and it permits a personalized vape experience.
This kit has two different coil options. The Mercury coil has a 1.2ohm resistance and fires in the range of 8 to 12 watts. The Mesh head has an output range of 6 to 10 watts and a 1.0ohm resistance. Both of these are ideal for use with different concentrations of nicotine salt based e-liquids.
This kit is safe to use thanks to multiple protections: short circuit, low power alert and reverse polarity.
Features & Specifications
- Dimensions: 40 x 20 x 78.46mm
- Made from zinc alloy, SS, resin
- Battery: single 13350 integrated battery 1000mAh
- Battery LED
- Coil resistance: 1ohm
- Constant 10W output
- Micro USB charging system
- Output voltage: 3.15V
- 2mL juice capacity cartridges
- Multiple safety protections
- Best with nic salt based e-liquids
In The Box
- iJoy Mercury kit
- 1 x Mecury Coil 1.2ohm(8-12W)
- Mercury Mesh Coil 1.0ohm(6-10W, Pre-installed)
- Warranty card
- Charging cable
- This new mod kit is compatible with pods, RDTAs, RDAs, and sub-ohm tanks. It also features 100 watts of power, a temperature mode, variable wattage, a color TFT display with 4 theme options, fast response time, refillable pods, lightning-fast charging, 6mL juice capacity, adjustable airflow control, and a shock, dust, and waterproof design.
- This tube-style pod system features ultra-portability, 2mL capacity cartridges, a 1500mAh integrated battery, USB charging, 23 watts of power, adjustable airflow control, easy refills, 3 power levels, easy coil replacement, multiple protections and GT mesh coils for dense clouds.
- The Yihi SXMIni Mi Class features photochemically etched finishes, an OLED display, 1.8ml capacity cartridges with easy refill system, an advanced Yihi chipset, MTL style Delrin drip tip, a 400 mAh integrated battery, a charging system and 1.0ohm coils for nic salt or high nicotine juices.
- This kit features incredible portability, a 1.6mL juice capacity, draw-activated firing, consistent flavor, 1.2ohm coils, a 40 minute charge time, a USB-C charging port, and either rubber or smooth plastic finish with 4 color options.
- Designed for beginners, this affordable pod system kit features a 700mAh battery, 17 watts of output, a pen-style shape, a 2.5mL pod with an integrated 0.9ohm coil, MTL vaping, RDL vaping, and a charging port.
- This mod pod kit features a 3000mAh integrated battery, up to 40 watts of power, variable wattage mode, a lightweight design, an intelligent coil detection system, 4.5mL capacity pods, easy refills, mouth-to-lung coil options, and a restricted direct-to-lung coil.