Lost Vape Ursa Quest Multi Kit: 100W/21700 TC RBA Pod Kit
Here are cheap deals to purchase the Lost Vape Ursa Quest Multi Kit. It features 100 watts of power, variable wattage mode, 21700/18650/20700 battery support, an incredible appearance with many finish options, 5 operating modes (VW, bypass, VV, TC, VPC), a boost setting, two sub-ohm coils, a 510 adapter, an RBA deck option, a 6mL or 7mL juice capacity, and easy refill system.
Robust Power From A Single 21700 Battery & 5 Operating Modes
What distinguishes the Lost Vape Ursa Quest Multi Kit from other pod systems is the massive 100 watts of power it generates from a single 21700 battery, but you may also insert a 20700 or 18650 battery. With a 21700, the Ursa Quest can operate for extended periods, even at the maximum output due to the high capacity of this cell. It is important to note that these batteries must be purchased separately. But, you don’t need a charger because a Type-C charging port on the front of mod will top off the installed battery 50% faster than previous devices by Lost Vape.
Inside the Lost Vape Ursa Quest, there’s the latest generation of Quest chipset that permits for firing in five modes and two additional boost settings permit higher initial output upon firing.
7mL & 6mL Pods Included & Wide Range Of Coil Options Including RBA Deck
The Ursa Quest Multi Kit includes both a 7ml Ursa Pro Pod with an 810 drip tip and a 6ml Ursa Pod with a 510 mouthpiece. The Pro Pod tank utilizes either the UB Pro coil or the UB Pro RBA, both of which result in a direct lung vape experience. With purchase, you will receive the 0.15 ohm UB Pro P1, pre-installed inside the Pro Tank.
By comparison, the 6ml Ursa Pod works with a UB M mesh coil for a mouth to lung vape experience. In the package, you will find that this pod comes with a pre-installed 0.2ohm UB M4 coil.
Both of these pod options are constructed from translucent PCTG and feature an effortless side fill port for easily adding e-liquid. And, a tank-style air intake slot is fully adjustable, from all the way closed to wide open, for a versatile puff style.
If you prefer to use your own tank with the Ursa Quest, you’re in luck as there is also an optional 510 adapter that has been redesigned so you may use it with any atomizer, build, or tank. This adapter has a high-quality bezel for a strong connection with tanks or other atomizers up to 30mm in diameter.
12 Design Options Including Leather & Wood Finishes
Design-wise, the Lost Vape Ursa Quest Multi Kit has four series: Ukiran Leather, Crocodile Leather, Wood Series, and Special Edition Embossed Leather. Each of these series comes in either stainless steel, gunmetal, or black, resulting in 12 different pattern combinations to choose from. Moreover, the chassis features strong zinc alloy material which in combination with the panels results in an impeccable vape kit.
Lost Vape Ursa Quest Multi Kit Features & Specifications
- Made from zinc alloy & leather or wood
- 12 color finishes
- Dimensions: 126mm x 43 x 33mm
- Weight: 173g
- Works with a single 21700 | 20700 | 18650 battery
- USB-C charging system
- Operating modes:Wattage/Voltage/TC/VPC/Bypass mode
- 2 Boost modes
- Power Output Range:5W-100W
- Input Voltage: 5V
- Battery Voltage: 3.0V-4.2V
- Output Voltage Range: 0.7V-8V
- Temperature Control Range:100°C-315°C/ 200°F-600°F
- 0.96-inch full-color TFT display screen | 80 x 160 resolution
- Pod Material:PCTG
- Included pods:
- Ursa Pro Pod (7ml) | 810 drip tip | 0.15Ω UB Pro P1 Coil
- Ursa Pod (6ml) | 510 drip tip | 0.2Ω UB M4 Coil
- Adjustable airflow control
- Effortless side-fill method
- RBA Coil option
- Optional 510 threaded adapter
With the order of the Ursa Quest, you will receive the mod, 2 pods with coils pre-installed, a 510 adapter, an airflow control base, a 18650 battery adapter, 8 o-rings, a USB-C charging cable, a warranty card, a leather warning card, and a manual.