Here are cheap deals for the OBS Cube X. This all-in-one vape kit is the updated version of the OBS Cube. The new setup features 80 watts of power, an ergonomic design, beautiful resin finishes, advanced variable wattage mode, a 0.96-inch OLED display, mesh coils for pure flavor and massive vapor, an easy top-fill system, and bottom adjustable airflow. This setup is outdated, so check newer vape kits.
USA Blowout! Smok Morph 3 230W Box Mod $16.15
Vandy Vape Jackaroo 18650 70-Watt Waterproof Pod Kit $20.99
Overview
This new setup is available in exquisite resin finishes: ink, bloody mary, firefly, lost temple, and rainbow candy.
It is slightly larger than its predecessors. The height of the kit is 129.2mm vs 122.5mm of the Cube Kit, Cube MTL Kit, and Cube Mini, all made by OBS.
The design is ergonomic, so holding in the hand will always be pleasurable. It is still small, allowing easy transportation in the pocket or purse.
The kit consists of the mod and Cube X Tank. The design has modern curved corners, a large fire button, and a decent-sized LED screen with a vertical menu. A panel on the bottom opens up to reveal the battery bay that stores a single 18650 battery which is recharged via a side USB port.
The Cube X Mod has a long battery life, so there is no need for frequent recharges.
Simply open the bottom battery panel via a sliding lock to replace the cell in the battery bay.
The micro USB port doubles as a firmware upgrade port. This permits the mod’s software to be easily updated to the latest version and allows the Cube X to keep up with the latest technologies in the vape marketplace.
The OBS Cube X Tank measures 27mm x 46mm (4mL version), is made from stainless steel, and has a 510 threaded connection. Refills are easy as the top cap slides to reveal a large filling slot. The included coils have mesh heating elements for pure flavor and huge vapor. You will receive one 0.2ohm M1 Mesh coil with a 50 to 80-watt range (best at 65 to 75W) and a 0.15ohm M3 coil that fires 50 to 70 watts (best at 55W to 65W).
Mod Features & Specifications
- Dimensions: 30.5mm x 30.5mm x 88.5mm
- Max Output: 80W
- Uses A Single 18650 Battery
- 5V – 1.5A Micro USB Charging System
- Firmware Upgrades
- Operating Modes: Variable Wattage
- Output Voltage Range: 3.2V-4.2V
- Resistance Rage: 0.1ohm-3.0ohm
- 0.96 inch LED Display
- Zinc Alloy Chassis
- Resin Panels
- 510 Threaded Connection
Kit Features & Specifications
- Dimensions: 24 x 46mm (2ml version)/ 27 x 46mm (4ml version)
- 304 Stainless Steel Chassis
- Pyrex Tank
- Resin Drip Tip
- Bottom Adjustable Airflow Control
- Mesh Coils
- M1 0.2ohm mesh coil | 50W-80W | best at 65-75W
- M3 0.15ohm coil | 50W-70W | best at 55-65W
In The Box
- 1 x Cube X Mod
- 1 x Cube X Tank
- 1 x 0.2ohm M1 Mesh Coil
- 1 x 0.15ohm M3 Mesh Coil
- 1 x Micro USB Cable
- 1 x Manual
