XFeng Baby Kit: 45W Mod with 9 Wattage Settings & 2mL Mesh Tank
The Snowwolf XFeng Baby is the small version of the 230 watt XFeng. The portable kit features 45 watts of power, smart curve modes, nine output settings, a single 18650 battery, fast 2 amp charging via a USB type-C, mesh coils, bottom adjustable airflow, easy refills, and a decent 2mL juice capacity.
Design
The XFeng Baby mod is constructed from high-quality zinc alloy and leather inlays on both sides for a soft and ergonomic hand feeling. It is available in silver or black.
Features
The device is small and portable, so it is easily transported. The mod works with a single 18650 battery with a fast charging system via a type C charging port. The included tank works with mesh coils and the mod has an IFV smart chip inside.
A Safe Vape Experience
The IFV80 chipboard features a myriad of safety protections such as short-circuit, PCB board overheating, overcharging and low voltage.
Easy Battery Access
The single 18650 that powers the kit is located underneath an effortless battery cap located next to the atomizer bezel. This makes battery replacement as simple as possible.
Nine Output Settings
For a personalized vape experience, the mod can fire from 9 to 45 watts. Choose from nine different output settings in this range to get the vapor production you like.
Specifications
The XFeng Baby mod measures 35mm x 48mm x 77mm and has a wattage range of 5 to 45 watts. The unit also has a smart curve mode, is powered by one 18650 battery and has a lightning-fast USB type-C charging interface. And, the XFeng Baby is compatible with atomizers with a resistance range of 0.2ohm to 3ohm.
The included Mark tank works with X Mesh coils for fast heating and amazing flavor and vapor. The coil inside has a 0.3ohm resistance, works in the range of 25 to 35 watts, but is best used with 30 watts of power. It can operate in a myriad of modes including power, temperature control, and smart curve. Refills of the 2mL juice reservoir are performed via the top cop which easily slides over to expose a fill port.
In The Box
With purchase, you will receive the Snowwolf XFeng Baby, the Mark tank, one Mesh coil, a spare glass tube, spare o-rings, a micro USB cable, a manual and a warranty card.
Related
Eleaf iStick Pico 2 Mod $23.99
This setup features 75 watts of power, a single 18650 battery, Type-C charging, a 4mL juice capacity, three exquisite colors, bottom adjustable airflow, two operating modes, and a display screen.Eleaf iStick Power Mono 3500mAh 80W Mod $26.99 | iStick Power Mono Kit $34.29
With 5 available colors, this starter kit features 80 watts of output, variable wattage mode, a 3500mAh battery with USB-C charging port, smart wattage recommendation, memory slots, a 4.5mL pod tank with easy bottom refills, and mesh coils.Voopoo Argus XT or MT 100W TC Waterproof Box Mod $24.15 | Argus MT or XT Kit $37.49
These setups are almost identical, but the MT has a built-in 3000mAh battery while the XT works with a single 18650 or 21700 battery. And, both feature 100 watts of variable power, four modes including temperature control, multiple protections, and a full-color display screen.Eleaf iStick Amnis 3 900mAh 25W Mod $8.89 | Kit $14.99
The Eleaf iStick Amnis 3 Kit features a 900mAh integrated battery, 3 output settings, button-activated firing, a 2mL tank with a top-filling method, and GS Air Coils.Innokin Sensis 3000mAh/40W VW Kit $33.29
The mod features a 3000mAh battery, USB-C charging, adjustable airflow control, 40 watts of output, variable wattage mode, a color screen, coil+ mode to improve flavor, and portability. Meanwhile, the included pod works with the latest Sceptre+ coils, is compatible with standard Sceptre coils, can hold 3.1mL of vape juice, and is easy to refill.Vaporesso GTX One 2000mAh/40W Box Mod $23.09
The full kit features flavor-boosting mesh coils, 40 watts of power, 2000mAh battery, Type-C USB charging, a display screen, a scratch-free cover, and adjustable power.