Here’s a great deal on the Tesla 2 Hydrographics Unregulated Box Mod
Update: This Item Is Sold Out Everywhere – Check Similar 100W Box Mod & Kit Discounts Below
The Tesla 2 Hydrographics features a massive 100 watts of output power and a very powerful 4500 mAh battery capacity. It’s an ideal mod to use with your favorite build or a sub-ohm tank.
Made of aluminum, the mod has an amazing appearance and is one of the best-looking devices out there. The Hydrographic finish is different on every single unit, so yours will have a completely unique look. At the top of the device, you will find a spring-loaded silver-plated copper positive pin to ensure it works with most atomizers and also maximum electrical conductivity.
The mod is very portable, yet it features plenty of power at 100W. It can fire atomizers with resistance as low as 0.1Ω, ensuring it will work with most atomizers, builds, and sub-ohm tanks. Voltage output is not adjustable, but you’ll achieve a maximum output of about 4.2V after a complete charge.
The Tesla 2 Hydrographics has a total battery capacity of 4500mAh battery which allows for extended vaping, without a need for constant recharging. The mod has two internal batteries so you’ll never have to remove them to recharge or worry about marrying batteries. Simply plug the device into any wall outlet or computer with any USB cable and you’re all set.
Since this is an unregulated box mod, there are never any adjustments required, so using the mod is very easy. All you do is attach an atomizer and press the fire button. The unit can be turned off by pressing the fire button five times.
Overall, the Tesla 2 hydrographics looks like an amazingly portable unregulated mod. It is a good alternative to those large mechanical mods and should perform quite well with any build or sub-tank.
Features & Specifications
- Dimensions: 22mm x 47mm x 76mm
- Made from aluminum
- Unique hydrographics design on each mod
- 510 threaded connector
- Springloaded silver plated & copper positive pin
- Constructed from aluminum
- Powered by dual internal batteries
- 4500mAh battery capacity
- Maximum output power: 100W (with 0.18Ω heating elements)
- Resistance range: 0.1Ω to 3.5Ω
- Maximum voltage output: 4.2V
- Maximum output current: 40A
- Over-voltage protection
- Over current protection
- Short circuit protection