Here are cheap deals to buy the Vandy Vape Jackaroo Mini Kit. The Jackaroo Mini Box Mod is waterproof/dustproof/shockproof and features integrated dual 18650 batteries (4000mAh), 128 watts of power, a plethora of modes including temperature control and bypass, and a full-color display screen. The kit comes with a tank that features a 4mL juice capacity, adjustable airflow, and mesh coils that install via push/pull method.
Mod Only Coming Soon
Jackaroo Mini Mod
The Vandy Vape Jackaroo Mini is the more portable edition of the Vandy Vape Jackaroo Dual. The new device is quite a bit smaller but features the same appearance as its predecessor. In fact, it looks like the available color options are identical: stripy black, G10 Obsidian Black, Resin Red Agate, and Resin Blue Porcelain. Overall, this setup is exquisite, small, compact, and easily held in the hand.
But that’s not all that sets this small device apart from the crowd. You see, it is also waterproof which indicates it has complete protection from dust or water. Actually, its waterproof rating comes in atIP67 which means it can be submerged in water up to 1.0 meter in depth for about 30 minutes without damage occurring to the circuit board. However, this rating is only accurate for pure water and not saltwater or other liquids such as soda or beer. As a bonus, the device is also shockproof, so there are no worries about accidental drops.
Built with the latest Vandy Vape chipset, the Jackaroo Mini can attain 128 watts of power which comes from two built-in dual 18650 batteries. This denotes that the total battery capacity comes in at 4000mAh, resulting in long vape times from a single charge. Nevertheless, charging is effortless and occurs via a micro USB port on the control face that you may plug into any USB outlet with the included cable.
Thanks to the chipset, you can also operate in a myriad of modes such as bypass, voltage, variable wattage, and 3 temperature control modes (nickel, titanium, stainless steel). To change the settings, simply use the large full-color display with the two adjustment buttons. Each mode has a different user interface to display the necessary vape data for each such as current mode, current wattage/temperature/voltage, battery charge level, atomizer resistance, and puff duration.
Safety-wise, the Vandy Vape Jackaroo Mini also does not disappoint as it has an integrated short circuit, overheat, low battery, open circuit, over-puff, and over-current protection system.
Jackaroo Mini Kit
If you buy the Jackaroo Mini Kit, you will also receive a tank, although not much info is available yet in regards to its specifications. However, we do know that the setup comes with a VVC 0.15ohm triple meshed coil that operates from 50 to 100 watts with freebase e-liquids. Plus there are many other compatible coils, but you must purchase these separately.
The coil is very easy to install as it features a push/pull system, resulting in a mess-free process. To access the coil, simply remove the base and pull it out.
Finally, the reservoir on the tank can hold up to 4mL of vape juice and is easily refilled via the flip-top cap. Adding e-liquid is ass easy as pressing a physical button at the top of the reservoir that will disengage the mouthpiece and expose a decent-sized filling slot.
Vandy Vape Jackaroo Mini Kit Features & Specifications
- Mod dimensions: 85mm x 30mm x 46mm
- Colors: Stripy Black, G10 Obsidian Black, Resin Blue Porcelain, Resin Red Agate
- Shock resistant
- Ergonomic/anti-slip grip
- Change display screen color
- Upgraded Vandy Vape chipset
- Powered by two internal 18650 batteries: 4000mAh capacity
- Micro-USB charging port
- Settings: Power/Bypass/Voltage/TC-Ni Mode/TC-SS/TC-Ti Mode
- Power range: 5-128W
- Safety protection features: Short Circuit/Open Circuit/Over-heating/Overcurrent protection/10 Seconds Cut-off/Low-Battery Warning
- Measurements: 49.2mm x 25.8mm
- Juice capacity: 4mL
- Top flip cap for effortless refills
- Bottom airflow ring fully adjustable
- Push/Pull coil installation
- Compatible with all CNC coils
- Included: 0.15ohm CNC meshed coil | 50W to 100W
With purchase, you will receive the kit, a manual, two VVC coils, an a micro USB cable.