Wismec Preva DNA: 1050mAh/3mL Evolv DNA GO 20W Pod System Kit
Here are cheap deals for the Wismec Preva DNA pod system. This kit features an Evolv DNA GO chipset, three output settings, 20 watts of maximum output, a battery LED, 3mL capacity refillable pods, a MTL coil, a DTL coil, a sliding top fill method, a 1050mAh battery, dynamic adjustable airflow, a myriad of safety protections.
With a similar design and identical chipset of the Lost Vape Orion Plus and Orion DNA GO, the Preva features exquisite craftsmanship and portability. The chassis is made of durable metal and feature high-quality carbon fiber panels for a luxurious appearance that is ergonomic in the hand. At the time of this writing, it looks like there is only a black option available. The device is also small thanks to dimensions of just 96mm x 43mm x 18.6mm and weight that comes in at only 136 grams. On the side, there is a premium fire button and responsive adjustment buttons.
Evolv DNA GO Chipset
For better performance, the new Wismec kit is built with a DNA GO chipboard which is infamous for accurate and efficient performance, as well as the capability to customize all the settings via eScribe from Evolv. This software permits for configuration, modification, and monitoring of any DNA device. It easily installs on a Windows or Mac PC and attaches to your device via its micro USB port. The chipboard on the Preva permits for up to 20 watts of power that can be personalized to three different output levels. An LED on the side indicates if power is set to low (yellow), medium (green) or high (blue). There is also replay technology to remember your chosen flavor setting. With this functionality, you can obtain the taste of your favorite puff and deliver uniform vapor prevention while limiting dry hits. The Wismec Preva also measures the resistance of your pod’s head to intelligently set the correct power level. For safety, there are timeout, low voltage, short circuit, low resistance and high resistance protections.
3mL Refillable Pods w/ 2 Coil Options
The 3mL cartridges easily insert into the Preva Mod and are kept in place with powerful magnets. For convenience, the pods are refilled via a top fill method that involves sliding over a tab next to the mouthpiece to reveal a large fill port with a rubber stopper. Two pods are included with purchase, both of which are built with alternate coils. The first is a 0.25ohm vapor-focused pod that results in direct-to-lung style vaping or you may prefer the flavor-focused 0.5ohm coil which may be compatible with nicotine salts and results in a mouth-to-lung vape experience.
Top Adjustable Airflow Control
At the bottom of the drip tip, you can twist a ring to regulate airflow. With this design, you may set the unit to a restricted or wide open setting or somewhere in between.
Powerful 1050mAh battery
You don’t need to install any batteries or buy a charger with this new DNA GO pod system as it is built with a 1050mAh internal battery that is effortlessly recharged via a bottom micro USB port. This permits for long vaping times, without recharging or refilling, as the cartridges also hold a decent 3mL. The charging system operates with a 1 amp of maximum current which should top off the battery in less than an hour.
Wismec Preva DNA Features & Specifications
- DNA GO Chipset
- Measurements: 96mm x 43mm x 18.6mm
- Weight: 136g
- Durable metal chassis
- Carbon fiber finish
- 1050mAh internal battery
- 1A micro USB onboard charging at bottom
- Battery LED
- Wattage output: 1W To 20W
- 3 power settings with LED: Low (yellow), Medium (green), High (blue)
- 3mL pods
- Sliding top fill system
- 0.25ohm PREVA DL pod for vapor
- 0.5ohm Preva MTL pod for flavor
- Safety Features
- Low voltage protection
- Low resistance protection
- Timeout protection
- High resistance protection
- Short circuit protection
- Top adjustable airflow control
- Replay function
- Auto resistance detection
In The Box
- Wismec Preva DNA Mod
- Wismec Preva DL Pod
- Wismec Preva MTL Pod
- USB Cable
- Spare Parts
- This kit features an advanced Evolv DNA GO chipset, exquisite design, a 950mAh battery, 40 watts of power, three ouput settings, LED lights, 2ml refillable pods, proprietary pod installation process and dual bottom adjustable airflow.
- The new pod system features an updated Evolv DNA chipset, a mesh coil option, five power settings, patent-pending temperature limiting technology, a new power regulation system, power boost functionality, coil resistance auto-detection, DNA GO coil compatibility, top adjustable airflow, and 15 color options including stabwood, resin, and carbon fiber finishes.
- The AvatarGO features 1.1mL pods, easy refills, 0.5ohm coils, 30 watts of power, an integrated 350mAh battery and a DNA Go chipset which allows customization via eScribe.
- The Project Sub-Ohm (PSO) edition of the Lost Vape Orion features a black chassis, a blue ocean scallop finish, blue buttons and several PSO engravings.