The Geekvape AP2 Pod Kit Kit. This pod kit features a waterproof/dustproof/shock-resistant design, 3 output levels, a long-lasting 900mAh integrated battery, 3 output settings, a 4.5mL leakproof pod, adjustable airflow control, a durable waterproof design, and an effortless side-fill system.
The Geekvape AP2 is the follow-up to the Geekvape Aegis Pod Kit and is also known as the Geekvape Aegis Pod 2. With dimensions of only 35mm x 17.5mm x 90mm, this new setup looks much smaller than its predecessor and there is a myriad of new color options as well. Choose from green camo, blue camo, red camo, gray camo, red, blue, rainbow, or black.
The AP2 is also said to be the toughest and very portable pod kit in the vape marketplace and features an enhanced design for better durability thanks to a new metallic shell. And, the kit features an IP67 rating which means it can be submerged in water for up to 30 minutes while being dustproof as well.
On the front of the device is where you will find the control face that is built with a multi-use button that not only fires the device but also permits changing the output to any of the three available settings. Pressing this button 5 times also activates a child safety lock while 3 pushes changes the voltage output.
Powered by an integrated 900mAh battery, the Geekvape AP2 will last longer than its predecessor without a recharge. A Type-C USB port on the bottom permits fast recharging with an included cable.
Vape juice inside this new kit is stored inside a 4.5mL cartridge that attaches to the mod via powerful magnets. This pod is leakproof and also features a side-fill port making refilling the reservoir quite simple.
The AP2 uses the same G Series coils as its predecessor with 6 different options you may see in the infographic below. With purchase, you will get the 0.8ohm coil that fires from 12 to 15 watts as well as the 0.6ohm version with an output capacility of 13 to 18 watts.
Switching between mouth-to-lung (MTL) and restricted direct-to-lung puffs (RDL) is also a simple process. To do so, simply rotate the pod position to match with a small hole on the mod (MTL) or no hole (RDL).
Features & Specifications
- Dimension: 35.00mm x 17.50 x 90.00mm
- Color Options Green Camo, Red Camo, Gray Camo, Blue Camo, Black, Rainbow, Blue, Red
- Coil Resistance: 0.4-3Ω
- Battery Capacity: 900mAh
- Charging Specification: Type-C 5V
- Low Voltage Warning: 3.2V±0.1V
- PCBA Temperature Alarm: >80°C
- Longest Vaping Time: 10s
- Working Temperature: -10~45°C
- Stand-by Current:≤15uA
- IP67 Rating
- Small & Tough
- Shock-Resistant Design
- Adjustable Airflow: RDL | MTL
- 3 Output Settings
- Built-in 900mAh Longlasting Battery
- 4.5ml Capacity
- Leakproof Side-Filling
- Accidental Press Protection
- Button or Air Firing
- Geekvape S Series Coils
- Included: G0.6Ω | 13-18W
- Included: G0.8Ω | 12-15W
- G1.2Ω | 9.5-11.5W
- G1.0Ω | 10-12W
- G1.2Ω S | 8-12W
- G1.8Ω | 7-9W
In The Package
- Geekvape AP2 Battery Mod
- 4.5mL Cartridge
- Preinstalled: G0.6Ω Coil
- Included: G0.8Ω Coil
- Coil Tool
- USB-C Cable