Here’s some fantastic deals on the Eleaf iStick Pico Mega 80W Box Mod or Kit.
Box Mod Only
Eleaf iStick Pico Mega is the upgraded version of the 75W iStick Pico. It features an increased output of 80W and can be powered by either an 18650 battery or a 26650 battery for a longer battery life.
The size of the Pico Mega comes in at 45.2mm x 23.2mm x 70.6mm, so it is a very tiny device. The mod looks to be made from the same materials as its 75W version which is made of stainless steel. At the top of the mod, there’s a 510 connection pin and on the control face, you’ll find the OLED and power/adjustment buttons. You can get a Pico Mega in white, silver, pink, grey or black.
The maximum power comes in at 80W and the temperature can be controlled from 100 to 314 degrees Celsius or 200 to 600 Fahrenheit. The mini mod will fire all the way down to just 0.05Ω, so it will work well with any build or tank. The Pico Mega also has the latest firmware from Eleaf so it can control temperature with all coil types and even features TCR mode so you can set the accurate resistance for any coil head type.
The Mega is powered by either a single 18650 or 26650 battery. It is probably a good idea to use a 26650 battery, as this will result in a longer battery life with maximum vaping time. The battery is easily accessed via an easy open threaded cap at the top or you can use the USB port to top off the cells. The Pico Mega is also capable of firmware upgrades in case Eleaf releases a new OS.
If you get the Pico Mega Kit, you’ll also receive a Melo 3 tank which will work perfectly with the mod. It is made from stainless steel and glass and has a 4ml tank capacity with an easy top fill system. Included is a heat resistant Delrin drip tip and it works with a wide range of coil heads including an included .25Ω Notchcoil or install any Aspire Triton or Atlantis coil heads.
iStick Pico Mega Features
- Power range: 1W to 80W
- Temperature control range: 200°F to 600°F or 100°C to 315°C
- Power mode resistance: 0.1Ω to 3.5Ω
- Variable temperature mode resistance: 0.05Ω to 1.5Ω
- Operating modes: VW, Bypass, TC(Ni, Ti, SS), TCR (M1, M2, M3)
- OLED screen
- 510 threaded connection
- Powered by either a 26650 or 18650
- USB charging
- Upgradeable Firmware
- 510 threading connection