Geekvape E100 Aegis Eteno 100W TC Pod Mod Kit $29.99

Here are cheap deals to buy the Geekvape E100 Aegis Eteno Kit. The mod features 5 to 100 watts of power, single 18650 battery support, a full-color user interface, a full suite of modes including temperature control and TCR, and a Type-C USB charging port. The kit has the E100 Pod with a 4.5mL juice capacity, top airflow control, easy refills, and Geekvape P series coils.

USA or Global Shipping Warehouse: $29.99 to $32.99 Use coupon code E100K at checkout
USA Deal: 32.53 Use coupon code 30CVD at checkout

Jump To

Geekvape E100 Box Mod

The Geekvape E100 is yet another device in the Aegis series of devices, but it appears this new setup is not waterproof. However, the appearance looks familiar with almost identical contours, a sliding lock also found in the Geekvape B60, exquisite metal buttons/accents, and a full-color display with intuitive vape data. The semi-gloss paint finish is available in volcanic grey, red, rainbow, black, beige, or blue.

On the technical level is where this new Geekvape kit shines compared to other recent Aegis devices. Driven by a single 18650 battery, this kit can produce 100 watts of power or operate in temperature control mode from 200 to 600 degrees Fahrenheit. In addition to the power and temperature control settings, use the box mod in smart, boosting, VPC, or TCR mode.

Geekvape E100 Kit

The Geekvape E100 Kit comes with a new pod using 0.2ohm or 0.4ohm Geekvape P-series coils. Pre-installed is the 0.2ohm version that works between 60 and 70 watts, or use the extra 0.4ohm edition with a 50 to the 60-watt range. These heads are meant for direct-to-lung vaping, have longevity, and feature an anti-spit back core to prevent e-juice from entering the mouthpiece. And they provide good flavor and vapor.

The Geekvape E100 Aegis Eteno pod mod kit can store up to 4.5mL of vape juice, easily refilled via a top-filling slot. To top off the e-liquid level inside the reservoir, unscrew the top cap, thus exposing a juice port compatible with most juice bottles.

Features & Specifications

Design
- Measurements: 81mm x 31.5mm x 143.8mm
- Color options: blue, beige, red, black, rainbow, volcanic grey
- 1.06″ full-color TFT screen
- User-friendly UI with dual adjustment buttons
- A-lock slider to lock the mod
AS-Chip 3.0 Chipset
- Utilizes a single 18650 battery
- 2A Type-C charging interface
- Operating modes: VW | TC-Ni | TC-Ti | TC-SS | TCR | VPC | Smart | Boosting
- Power range: 5W- 100W
- Temperature range: 100℃–315℃ or 200℉–600℉ | Adjustable in increments of 5℉ or 1℃
- Operating temperature 0℃-45℃
- Storage temperature -20℃-60℃
- Relative Humidity 45%RH-75%RH
- Max Output Current: 35A
- Max Output Voltage: 7.5V
- Safety protections
  - High temperature
  - Over-discharge
  - Overcharge
  - High current
  - Short circuit
  - Switch timeout
Pod
- 4.5mL juice capacity
- Top-fill method
- Top adjustable airflow control
Coils
- Compatible with all P Series Coils
- Pre-installed: 0.2Ω | 60-70W
- Spare Coil: 0.4Ω | 50-60W