The Smoant Charon Baby Plus Kit. This new pod system features magnetic replaceable 3D panels, puff-activated firing, a 1000mAh integrated battery, all vape styles, adjustable airflow control, fast charging, 3.5ml pods, new mesh coils that last longer, and multiple protections.
In the design department, the Smoant Charon Baby Plus utilizes replaceable panels that are held in place by way of strong magnets. This means you can swap them out at any time for a brand new appearance that is sure to turn heads thanks to a wide range of graffiti-like prints. There are many optional panels, but with purchase, you can choose from these colors: Hannya, Lion, Yawata, Tiger, Pan, or Dragon. Check the infographic below for additional panel options.
All the Charon Baby Plus panels use brand new UV 3D prints with 2-layered protective UV films to ensure longevity, fingerprint resistance, and bright colors.
This setup is also designed to be easily held in the hand and with maximum comfort. And, there’s a lanyard carrying hole, but a lanyard is not included in the package.
Inside the Smoant Charon Baby Plus Kit, there’s an AI smart ant-chip that auto-adjusts wattage according to which coil is installed inside the pod. This makes vaping absolutely hassle-free as power output is always optimized for the best performance. This chipset also has several integrated safety features such as low voltage, over time, short-circuit, overcharging, and no-load protection.
Inside the Charon Baby Plus, there’s a 1000mAh battery which is massive for this tiny setup. This means you can vape all day without a recharge, but if one is required, the 1 amp Type-C USB will replenish the battery in less than 1 hour.
An LED at the bottom of the control face permits easy tracking of the battery voltage. A white light means that the battery charge percentage is above 70 percent, blue means 20 to 70 percent, while a red light means the device needs to be recharged.
This kit uses a 3.5ml cartridge that stays in place with strong magnets so the pod won’t move around. And, to make refills convenient, there’s a juice port on the side with a silicone plug to prevent leakage.
This Charon Baby Plus Pod Kit has three compatible coils, but you may also install Santi Coils if that is what you prefer. With purchase, you will get two 0.6 S-2 coils for restricted direct-to-lung vaping at 18 to 25 watts. And, there are two other coils you may buy separately: the S-1 DL coil has a 0.4ohm resistance and works from 30 to 35 watts, while the optional S-3 MTL coil has a 1.2ohm resistance and fires from 8 to 12 watts. All of these heads are built with mesh heating elements that heat up fast for instant, flavorful vapor production.
Also important to note is that the Charon Baby Plus utilizes new mesh material that extends the lifespan of the coil. And, it ensures that your vape juice inside the cartridge stays pure.
As you may have seen in the previous paragraph, the coils allow DL, RDL, or MTL vaping, but airflow is also adjustable. Moreover, the Charon Baby Plus utilizes a unique U-shaped internal air channel and a dual independent airflow system. In this way, you may have a versatile vape experience. To change the airflow setting, you can slide a convenient button into your preferred air intake position.
Features & Specifications
- Dimensions: 22mm x 45.6 x 79.4mm
- Made from zinc alloy & PCTG
- Color options: lion, yawata, tiger, pan, dragon
- Power range: 1-35W
- Voltage range: 3.2V-4.2V
- USB-C Charging port: 5V/1A
- 3.5ml Pod
- Easy side-fill juice port
- 1000mAh internal battery
- Wattage adjusts according to coil
- Mod resistance: 0.3-3.0ohm
- 3 mesh coil options
- Compatible with Santi coils
- Draw-activated firing
- Support DTL, MTL, RDL
- Ernicrmo mesh structure for longevity
- 3 airflow settings
- AI smart ANT chipset
- Protections: overcharge | short circuit | overtime | no-load | low voltage
In The Box
- Charon Baby Plus Mod
- 2 x 0.6Ω S-2 mesh coil
- Type-C USB charging cable
- Warranty info
- Authenticity certificate