Here are cheap deals to buy the Vandy Vape Pulse AIO Kit or Vandy Vape Pulse AIO.5 Kit. This Boro tank-compatible kit includes both a standard and DIY RBA pod. And, this all-in-one setup also features 80 watts of power from a 1000mAh battery, a USB-C charging port, customizable buttons and plates, 21700/20700/18650 battery support, a high number of coil options, a multitude of safety protections, and a plethora of modes including temperature, voltage, variable wattage, and bypass.
Update August 9, 2022: The Vandy Vape Pulse AIO.5 is here with a new square button, an updated frame, and a metal interface for the 510 connection.
Powered by an updated Vandy Vape chipset, the Pulse AIO is capable of reaching 80 watts of power in several modes: bypass, variable wattage, temperature control, and voltage. Power is generated by either a 21700, 20700 or 18650 battery, with included adapter. A Type-C charging system on the side provides a fast, speedy charging process.
The chipboard also allows for a safe vape experience. Not only will the device warn you when the battery is low, but it will also prevent open circuit, over-current, over-puff, short circuit, and high-temperature issues. which means you may feel safe whenever using this all-in-one setup.
In the design department, the Vandy Vape Pulse AIO kit is made of PC or ABS nylon, making it much lighter than any of the preceding devices such as the Pulse V2. So, really the heaviest part of this setup would be the battery. Six colors are available: frosted blue, frosted red, frosted black, frosted green, frosted white, and black.
Perhaps the best aspect of this kit is that you can exchange the plates and even the fire button. The tools to do so are included with purchase, but the accessories to swap out the button or panel will be released later on.
Pre-Built & DIY Pod Included
The Pulse AIO includes both a pre-built 3.7ml pod, as well as an RBA pod that can hold 3.7ml of vape juice. Inside the standard pod, there’s an interchangeable coil pre-installed, but as of this writing, it is unsure which coil head it is. Fortunately, the setup works with any VVC coils of which you may see the parameters in the infographic below. Installing the coil is also effortless thanks to a push/pull design and refills are a breeze thanks to an integrated side-fill port.
The kit also works with any Boro-compatible tank. To ensure all Boro tanks have a tight fit, you may adjust the height of the positive table to the required height.
A closer inspection of the RBA tank also indicates that airflow is curved, making it suitable for both small and large coil builds. You may adjust the air intake by rotating the ring underneath the deck.
Features & Specs
- Size: 55.6*97.5*28.2mm
- Operating Voltage: 3.2-4.2V
- Charging Input Voltage: 5+0.25V
- RBA Pod Capacity: 3.7ml
- Pre-Built Pod Capacity: 5ml
- Power range: 5-80W
- Maxim Output Current: 32A
- Resistance: 0.05-3.002
- Charging Current: 1000mAh
- Boro compatible and tanks work in most boro style mods
- DIY RBA tank with curved airflow suitable for large or small coils.
- Mesh pre-made coil tank.
- Easy to customize button and plates.
- 21700, 20700, and 18650 (w/adapter) compatible.
- Adjustable positive pin.
- 80w maximum with wattage, temp control, voltage, bypass
- PULSE AIO Device
- PULSE AIO DIY Pod
- PULSE AIO Pod
- 2 x VVC COIL
- 2 x 24ga Ni80 Coil 0.4ohm
- Bag Of Accessories
- Coil lead guide
- QC TYPE-C USB Cable
- Instruction Manual
- 18650 Battery Adaptor
- G.W: 302.89