Vandy Vape Pulse X 90W/8ML TC Squonk Mod $26.74

Update: The Vandy Vape Pulse X Has Been Discontinued – Check Newer Squonk Kit & Mod Deals Or All Mod/Kit Deals. Or check out the new Vandy Vape Pulse 3 Squonker

Here are cheap deals for the Vandy Vape Pulse X BF Mod Kit. This new squonk kit features 90 watts of power, a single 21700/20700 or 18650 battery, rapid firing, easy grip, precise output control, horizonal & vertical coil builds, a stainless and frosted cap, an 8ml juice bottle with a bottom and top fill system and power mode/temperature control.

Review

Overview

From a design perspective, the Pulse X Mod has measurements of 82mm x 56mm x28mm and has a similar design to the previous Pulse Mod by Vandy Vape. The finishes are available in black, red, frosted red, frosted green, frosted cyan, frosted amber, and frosted black. With purchase, you will get two chuff caps, one made from stainless steel and a frosted translucent cap. The large sides of the Pulse X feature removable panels that hide the battery and squonk bottle. The mod’s squonk bottle can store 8ml of e-juice and can be refilled via a bottom fill system or a unique top fill setup. Adjacent to the silicone juice bottle, a 18650 battery, 20700 battery, or 21700 battery is installed. An onboard charging system allows for charging the cell via a micro USB port.

The build deck on the Vandy Vape Pulse X BF Kit’s RDA supports both vertical and horizontal builds. When squonking, juice wicks the cotton from the top, and any excess juice ends up in the juice well underneath. No coils or wires are included with the purchase, but it is recommended to use Triple Fused Clapton Wire or Coils.

Technically, the Pulse X BF Box Mod is capable of up to 90 watts of power, 315 degrees temperature with builds down to 0.05ohm in either mode. Keeping track of your vape data occurs via a horizontal menu on a standard OLED display with a black background and white font. Above and below the screen, you will see a large fire, two adjustment buttons, and a micro USB charging and upgrade port.

Features & Specifications

Mod dimensions: 82mm x 56mm x 28mm
Tank dimensions: 24mm x 25.5mm
Works with 18650/20700/21700 cells
Micro-USB charging system
8ml silicone squonk bottle top
Squonk feed and bottom juice return technique
- Soft
- Easy to squeeze
Top fill and bottom fill system
Power range: 5W to 90W
Standby current: <30uA
Output voltage range: 0.5V to 8.5V
Resistance range: 0.05ohm to 3.0ohm (VW) or 1.5ohm (TC)
Temperature Range 200 to 600°F/100 to 315°F
Large fire button
Rapid firing
Safety protections
- Low battery
- Overtime
- Over current
- Short circuit
- Open circuit
- Overheat
Build deck
- Works with vertical and horizontal builds
Innovative airflow
Resin drip tip
2ml juice well
Top squonk and bottom juice return
Stainless steel/frosted caps both included
Gold-plated 510 threaded connection