Eleaf Istick Pico RDTA Kit $12.90 (USA)

Here’s a great deal on the tiny Eleaf iStick Pico 75W RDTA Kit. Unfortunately, this item is discontinued, so check other Eleaf iStick Devices.

US Store (Choose USA Warehouse): $12.90 Use coupon code PRDTA at checkout

Review

Overview

The Istick Pico RDTA Kit is Eleaf’s brand new all-in-one bundle features the very popular 75 watt Pico Mod with an internal e-liquid tank. It features a compact setup with newly designed RDTA, a removable dual post build deck, a large tank capacity with easy refill and flexible adjustable airflow.

This entire kit, including atomizer, measures 50mm x 24mm x 100mm and weights 149g, making it very light and portable. The design of this bundle is brand new with silver or black colorways and two options for the emblazoned logo that are matched on both the RDTA and the mod. And, ergonomics was kept in mind during the design phase to ensure the kit feels comfortable in the hand and can be stored in the pocket or purse.

Inside the mod, you will find a large 4.2ml tank that feeds the atomizer and is effortlessly refilled via a large fill port that is built into the base of the RDTA. The side of the box mod features a viewing window to monitor the e-juice level and also has an internal light to make sure you can easily see inside. The reservoir can also be removed for cleaning and maintenance.

Unlike its predecessors, the Istick Pico RDTA Mod utilizes an internal 2300mAh battery that is recharged by using the USB port. With this capacity, the battery should permit extended vaping times at a maximum of 75 watts. The unit can fire in a wide range of modes such as power mode, bypass mode, smart mode, three temperature control modes and TCR mode. Variable temperature operation works with nickel, titanium and nickel coils and output tops out at 600 Fahrenheit. This mini mod is also capable of firing down to 0.05ohm in any of the temperature control modes. With preheat capability, the Istick Pico can rapidly heat coils at higher wattage during initial firing for a more enjoyable vaping experience. Best of all, firmware upgrades are also possible in case new technologies are released into the marketplace. Simply connect the mod to any USB outlet or port with the included cable. If an upgrade fails, there’s a convenient reset button on the bottom that will return the unit’s software to factory settings.

On the control face, you will see the same OLED screen you are used to with preceding Pico mods. There are four interface options with each one showing the resistance and wattage or temperature with either total puffs, total vaping seconds, voltage or a simplified menu.

The large firing button that used to be on the side is now located next to the RDTA at the top. It features a large dimension for easy operation and ergonomics.

Next to the firing switch, the RDTA can be found. It is built with a removable deck to allow for easy coil building. The deck features dual posts with large terminals to work with intricate builds. In order to prevent dry hits, four unique wicking holes are said to effectively saturate the cotton. Airflow occurs via 8 holes located on the chuff cap and is adjustable by rotating the mouthpiece. Included with purchase, you will get a wide bore drip tip to maximize airflow.getting this kit.