Geekvape Aegis Squonk: 10mL/100W TC Waterproof Squonk Mod or Kit
Here’s a cheap deal for the Geekvape Aegis Squonk Box Mod or RDA Kit. It features the same AS-100 chipset and a similar design found in previous Geekvape Aegis devices. Additionally, this squonker is waterproof, dustproof and shockproof, utilizes a single 18650 battery, has up to 100 watts of power, utilizes a 10mL internal squonk bottle with easy push operation, and has a plethora of modes including power, temperate, curve, and bypass. The starter kit comes with a Tengu 24mm RDA. Also, be sure to check out the just released Geekvape Aegis X Kit.
IP67 Waterproof/Dustproof & Shockproof
The Aegis Squonker is made from light but durable zinc-aluminum alloy and is waterproof, dustproof and shockproof. This means it can be immersed in 1m of water for up to 30 minutes without damage to the materials or chipset. And, you may drop it or use it in dusty environments without any worries. Cleaning is also easier as you can simply wash it under the faucet.
The design is quite similar to the Geekvape Aegis line of devices and available colors include green, blue, orange, red, gunmetal and black. All colors feature an ergonomic rubberized edge that also looks exquisite.
Impeccable Watertight Squonk System
At the back, there’s an interchangeable pump that directs juice to the atomizer when pressed. This section can be swapped out for a non-squonk piece if preferred. Removal of the pump section permits accessing the silicone juice bottle which can be effortlessly removed for filling. It stores up to 10mL of e-liquid for extended vape time.
The control face is built with a single power button and two adjustment buttons. And, in the middle, there’s a monochrome screen that shows vape data vertically. Indicators include current mode, power/temperature, a battery bar for the single cell that powers the setup, coil resistance, current amperage, current voltage and puff counts. More details in regards to the screen will be released shortly.
The Aegis Squonker is constructed with an exceptional AS chipboard to produce stable and sound operation with up to 100 watts of output. Modes are wide-ranging and include curve mode, power mode, temperature control mode, TCR mode, and a temperature control suite with nickel, titanium or stainless steel atomizers. Any atomizer with a 0.05ohm or higher resistance is compatible with this squonk mod. For safety, there are a plethora of safety features such as over-current protection, dry-hit protection, overheat protection, overcharge protection, over-discharge protection, short circuit protection, and overpuff protection.
Built with an AS-100 chipset, performance is efficient and temperature control modes will perform in a stable manner. Additionally, the mod fires within 9mS which is virtually instant response.
Single 18650 Battery Support
Powering the Geekvape Aegis Squonker is a single 18650 battery that is easily accessed and can be recharged via the front micro USB port.
In The Box
With purchase of the kit, you will receive the Aegis Squonk Mod, a Tengu RDA, a 10mL squonk bottle, a user manual, a 510 drip tip adaptor, a battery door assist tool, a GV triangular tool, an 810 drip tip, extra parts, two N80 fused clapton coils, 2 x feather cotton, a micro USB cable, an L-shaped hexagonal wrench, a warranty card and a promotional card.
Geekvape Aegis Squonker Features & Specifications
- Measurements: 41.2 x 86.4mm x 31.5mm
- Made from zinc alloy
- Rubberized exterior edge
- Small and portable
- Shock resistant
- 10mL squonk bottle
- Easy push button
- Colors: green, blue, orange, red, gunmetal, black
- Power Range: 5W- 100W
- Chipset: AS-100
- Battery: single 18650 (excluded)
- Micro USB onboard charging
- Atomizer Resistance: 0.05ohm – 3.0ohm
- Modes: Power/TC(Ni,Ti,SS)/TCR/VPC/BYPASS
- Waterproof, dustproof and shockproof
- Safety protections
- Short circuit
- This squonker kit features an integrated battery, an advanced chipset, an OLED display, nicotine salt compatibility, a mouth-to-lung vape experience, restricted airflow and a dual post deck with one wire hole on each post.
- The Delta Squonk Mod by Revenant & TVL features a state-of-the-art Omni Board 4.0 chipset, a PTF filling system for fast refills, replay mode (resistance down to 0.03ohm), instant firing, a 6.5ml internal juice tank, 100 watts of power, micro USB charging and single 21700/20700/18650 compatibility. The Delta is also available in a kit with Reload RDA.
- The mod features a portable design, a display screen, a 0.08ohm atomizer resistance capability, 90 watts of power, and can be used as a squonk or standard mod.
- This squonker features 80 watts of power, temperature control mode, bypass mode, voltage mode, power mode, 18650 battery support, a display screen, and a 7.5mL squonk bottle.
- The Dovpo Topside Dual Squonker features a 5mL juice capacity, easy top refills, dual bottom adjustable airflow and 3 coil options (normal, TC or RBA).
- The Ijoy Capo SRDA Kit includes the Ijoy Capo Squonker Mod and SRDA. It features pure wattage vaping, easy coil building, pre-made rebuildable coils, 9ml food-grade juice bottle and includes a 21700 battery for longer vaping times.
- On the technical level, this is the same device as the original Topside Dual, but it comes with a full color display and a premium finish that is impermeable, scratch resistant, lighter, smooth to the touch and absolutely exquisite.
- The Stentorian RAM by Wotofo has an exquisite wood with resin design and is squonk ready thanks to a BF 510 atomizer bezel.