Check out these cheap deals for the GeekVape GBOX Squonk Kit. The RDA kit features an 8ml squonk bottle, 200 watts of power, a dual post deck, a massive display screen, dual 18650 batteries (not included), micro USB charging with passthrough, versatile temperature control, power mode, and bypass mode. This setup is outdated, so visit our squonk mods page for alternatives.
GBOX Squonk Box Mod
The Geekvape GBOX Squonk Mod features dual 18650 batteries, 200 watts of power, a state-of-the-art AS chip, an 8ml squonk bottle, and versatile temperature control. If you get the full kit, you will also receive the 24mm Radar RDA built with a unique dual post deck, compatible with single & dual builds, has a large juice well, and features extreme user-friendliness. The kit can be in pearl chrome, army green, wine red, and black/red.
With 85mm x 55.4mm measurements, the mod looks to be transportable and easy to store in your purse or pocket. At the top, there’s a spring-loaded 510 connection for easy and flush installs of your BF atomizer. On the front of the unit, there’s a large OLED display with a vertical menu. Vape data d display varies according to your current mode and may include wattage, two battery bars, coil resistance, amperage, voltage, puff number, TCR value, and more. Dual batteries power the setup, are bottom-loaded for easy installation, and are stored behind a door with an effortless yet durable lock mechanism. Batteries can be charged via the micro USB port that supports passthrough vaping (vape while charging). The GBOX Squonk Mod is completely squonk-ready thanks to a springloaded 510 BF squonk connector fed by an 8ml juice bottle. On the technical level, the mod can operate in many modes thanks to the latest AS chipboard. These include power mode, temperature control with nickel, temperature control with titanium, temperature control with stainless steel, and a bypass mode for vape veterans. The resistance capability is also quite low at 0.05 ohm in temperature mode and 0.10 ohm in power mode. The temperature range is the standard 200 to 600 degrees Fahrenheit range.
GBOX Squonk RDA Kit
You will also receive the Radar RDA if you get the GBOX Squonk kit. It is constructed with stainless steel, measures 24mm in diameter, and perfectly matches the mod’s color and finish. Built with a unique dual post deck, this RDA features single/dual coil compatibility, elevated gold-plated posts, PEEK insulation, and a deep juice well to prevent frequent dripping. Airflow is adjustable by rotating the top cap and can be widely changed to your liking. And there’s a single coil airflow option for single builds. The Radar can be used with 510 and 810 drip tips. And, at the bottom of the device, there’s a gold-plated BF pin for use with your favorite squonker.
If you purchase the kit, you will receive the squonker, the Radar RDA, a GV Allen key, a spare squonk bottle, a Delrin drip tip, an accessories pack, a 510 drip tip adapter, a manual and a micro USB charging cable.
Features & Specifications
Mod
- Dimensions: 85mm x 55.4mm
- Colors: black/red, wine red, army green, pearl chrome
- Gold-plated/springloaded squonk atomizer bezel
- Large OLED with vertical menu
- Two battery bars
- Utilizes dual 18650 cells
- Micro USB charging system
- Passthrough charging capability
- Effortless bottom battery door
- Durable lock mechanism
- 8ml internal squonk bottle
- Viewing window to monitor levels
- Built with AS chipboard
- Operating modes: Power/TC-Ti/TC-Ni/TC-SS/ Bypass
- Preheat/ramp vaping
- Maximum power: 200W
- Temperature range：200℉ to 570℉ or 100℃ to 315℃
- Resistance range power/variable temp：0.1Ω to 3.5Ω/0.05Ω to 1.5Ω
RDA
- Diameter: 24mm
- Made from stainless steel
- Matches both mod color and appearance
- Uses 510 or 810 drip tips
- Gold-plated BF 510 pin
- Dual post deck
- Elevated gold-plated posts
- Deep juice well for infrequent dripping
- PEEK insulated
- Easily install wire
- Single & dual coil compatible
- Dual side adjustable airflow
- It can be set to a single coil
