Kanger IKEN 230W 5100mAh Box Mod Kit $38.85

Check out these discounts for the Kangertech IKEN Box Mod or Kit.  The 230 watt IKEN Box Mod with full color display is made with a massive 5100mAh integrated battery, for the longest possible vape times.

  • Full Kit w/ Tank $38.85 get-this-deal Use coupon code KIKENK at checkout (exclusive 10% off sitewide except clearance)



The IKEN is Kanger’s latest all-in-one bundle.  It features a mod with massive internal 5100mAh battery, long standby capability, a whopping 230 watts of output, a large 1.54″ TFT color display, temperature control modes including TCR and a 4ml top-filled tank.  The kit is available in yellow, red, fluorescent green, green and black.

The mod in this setup is constructed from zinc alloy, measures 44mm x 42mm x 78mm and weighs just 211 grams.  At the top, there’s a sophisticated 510 connector that is compatible with atomizer pins up to 7mm in length and builds/tanks up to 25mm in diameter

On the front-located control face, you will see an army grade TFT color screen that measures 1.54 inches across, is highly resistant to vibration, consumes very little power and can handle temperatures down to -40 degrees. For easy viewing, the menu is in a vertical format with vape data that includes a battery bar, current temperature/wattage, resistance, voltage, puff counts and puff time.  The menu is altered according to whether you set the mod to beginner, intermediate or expert mode.

The IKEN Box Mod is built with an internal 5100mAh battery for extreme vaping times and ultra-long standby capacity.  The integrated cell is recharged via the micro USB port. Other technical specifications for this device are 230 watts of output, an atomizer capability down to 0.10ohm and a temperature range from 200 to 600 degrees Fahrenheit.  Operating modes include power mode, nickel temperature control, titanium temperature control, stainless steel temperature control and TCR mode of which settings can be stored in two memory slots.

The included IKEN Tank features a stainless steel body with a PCTG tube which is said to be stronger, tougher and clearer.  The device measures 24mm x 36mm, is 100% leak-proof and has a 4ml tank reservoir that is easily refilled by uscrewing the top cap and squirting juice into large fill ports.  Included with purchase, you will get a heat resistant drip tip.

This tank is made with “U” airflow technology which means airflow enters two adjustable air intakes a the top.  The coils used are SSOCC coils which as stainless steel organic cotton coils that are available with a wide range of coil wire types and resistances. Two SSOCC coils are included with purchase.

Kit Features & Specs

Included With Purchase

  • IKEN Mod
  • IKEN Tank
  • 2 x SSOCC coils
  • Micro USB Cable
  • Manual

IKEN Box Mod

  • Measurements: 44mm x 42mm x 78mm
  • Weight: 211g
  • Made from zinc alloy
  • Colors: black, red, fluorescent green, yellow, green
  • 510 threaded connector
    • 25mm diameter compatible
    • Works with 5mm to 7mm connector pins
  • 1.54″ TFT color display
    • Army grade
    • Vibration resistant
    • Little power use
    • Resistant to low temperatures
    • Set menu to beginner, intermediate or expert
  • Integrated battery
    • 5100mAh capacity
    • Long vaping times
    • Long standby time
    • Charged via the micro USB port
  • Technical specifications
    • Power output range: 1W to 230W
    • Temperature range: 200°F to 600°F
    • Atomizer resistance range: 0.10Ω to 5.0Ω
    • Operating modes: VW /NI/TI/SS/TCR(M1,M2)


  • Dimensions: 24mm x 36mm
  • Stainless steel body with PCTG tank tube
  • Tank capacity: 4ml
  • Top fill setup
  • Completely leak proof
    • 500 rigorous independent tests
  • Can be completely disassembled
    • Easily cleaned
  • U-Airflow
    • Dual top adjustable air slots
  • Utilizes SSOCC coils


Join 60,000 Subcscribers & Never Miss A Vape Deal Again!
We respect your privacy.

Total Views Today: 1  Total Views: 275