An amazing deal on the Eleaf Istick 100W Box Mod.
This Item Is Out Of Stock Everywhere – Check Similar iStick Mods & Kits Below
The next mod in the IStick series is the 100W box mod. This device is a quality, high-wattage mod, so don’t let the low price fool you.
Eleaf has always been known for small mods, but that has changed with the powerful 100W Istick. The design of the unit is amazing. Instead of an awkward square box, this feels good in the hand with its rounded edges. This mod has a magnetic removable battery panel. But you won’t need a charger as this device has USB charging. That means you can continue to vape while it’s plugged in. Two 18650 batteries power it.
The unit has a 510 spring-loaded connector, so there shouldn’t be any problems hooking up virtually any atomizer with resistance as low as .15 Ohm. Keep in mind that this is not a temperature control device, so using titanium or nickel coils is impossible.
The device can fire atomizers from 5 to 100 Watts, adjustable in increments of 0.1W. You can change from wattage to voltage mode, or vice versa, by pressing the fire button three times. The Voltage range is from 2 to 10 Volts. Hitting the power button five times will turn the mod off while holding the plus and minus buttons will switch to left-handed mode.
- Variable Wattage: 5.0W to 100W
- Variable Voltage: 2.0V to10V
- Firing Resistance: 0.15 to 5.0 ohm
- Magnetized Battery Panel
- Takes 2 High Amp 18650 Batteries
- OLED Display
- Spring Loaded 510 Contact Pin
- Stainless Steel 510 Threads
- Made from aluminum
- Stealth Mode Capable
- Pass through Capable
- Advanced Temperature Alarm Function
- Low Voltage Protection
- Temperature Protection
- Atomizer Protection
- Short Circuit Protection