Update: The Kanger DripEz 80W Box Mod Kit Has Been Discontinued – Check Newer Squonk Kit & Mod Deals Or All Mod/Kit Deals
The DripEZ is a new squonker starter kit by Kangertech. It is built with an internal 15ml bottle that directs e-liquid to the DripEZ RDA via a unique juice pump It is a very similar product to Kanger’s Dripbox, except with the DripEZ, you also have the ability to use any build or tank instead of the included atomizer.
Including the RDA, the entire bundle measures 127mm x 50.8mm and can be purchased in silver or black. Inside the mod section, you will find a 15ml e-juice bottle that is easily refilled, without hassles. But, instead of squeezing the bottle to direct juice to the atomizer, you push down on the brand new pump cap which is located adjacent and directs liquid to the atomizer. This makes wicking your cotton easier than ever.
The mod is also made with the latest technology and operating system which results in easy menu navigation and simple interchanging between modes. The DripEZ mod is capable of up to 80 watts of power and variable temperature operation from 200°F to 600°F with nickel, stainless steel and titanium coil types. The mod should be able to fire the majority of atomizers, as long as it has a resistance of 0.1Ω or higher. There’s also a few safety features built into the mod which include low resistance protection, high temp protection and low battery warning.
To put out 80 watts of power, the DripEZ utilizes an external 18650 battery which can be charged while it’s inside the device. The cell is located behind an easy magnetic door for easy battery swaps.
The RDA measures 22mm across and features a dual post deck. The deck’s posts are constructed with a screwless clamp design with which you simply press down on the posts to swap out builds. This makes it easy to use with a wide variety of wire types. You can also use a pre-built Kanthal 0.2Ω if building is not your thing. Airflow on the RDA is also adjustable.
Features & Specifications
- Constructed from zinc alloy
- Measurements: 57.5mm x 39mm x 31mm
- Weight: 270g
- 510 threaded connection
- Replaceable internal 15ml glass bottle
- One-of-a-kind pump action delivery setup
- Power range: 5W to 80W
- Temperature control supports Ni200 / Ti / SS
- Temperature range: 100°C to 315°C or 200°F to 600°F
- Resistance range: 0.1Ω to2.5Ω
- Powered by a single 18650 external battery
- USB 1A charging
- Magnetic battery door
- Low resistance protection
- Low battery warning
- Over temperature protection
- Dual post deck with push-down screwless clamps
- Build your own coils or use pre-made Kanthal 0.2Ω coil
- Adjustable airflow control