Update: The S-Body Legend II DNA 75 Box Mod Has Been Discontinued – Check Newer Evolv DNA Mods Or All Mod/Kit Deals
Steam Crave Hadron Mini DNA100C 100W Box Mod Kit $110.99
Dovpo Riva 200 200W TC Box Mod $23.00
Blowout! Geekvape Z100C DNA 100C 100W Pod Mod Kit $90.63
Dovpo Clutch X18 Dual 18650 Mech Mod $97.99
Lost Vape Thelema DNA 250C Box Mod $110.00
Dovpo Top Gear DNA250C Box Mod $141.07
Here are cheap deals for the S-Body Legend II DNA 75 Box Mod. This new mod features a DNA 75 chipset, a resin finish, 75 watts of power, 8 output settings, both 26650 and 18650 battery compatibility and efficient/accurate performance.
Overview
Made with a beautiful resin finish, the Legend 2 is made from zinc alloy, measures only 85mm x 46mm x 31mm and weighs just 144 grams. The design looks quite similar to its predessor thanks to beautiful curves and stainless steel buttons on the control face which also features an OLED screen. Its menu is the same interface as you may see on any DNA 75 mod and vape data includes current mode, power/temperature, resistance and more. At the top of the Legend II, you will see a 510 connection bezel that has ventilation holes and a springloaded center pin for easy atomizer installation and good airflow.
Technically, the Legend II’s performance is efficient and accurate which is what you would expect from any Evolv chipset. With a power output of 75 watts and temperature control up to 600 degrees Fahrenheit, the mod is compatibile with any atomizer that has a heating element of 0.1ohm or above. There are 8 output presets for temperature control including nickel presets, titanium presets and one that is compatible with stainless steel heating elements. Powering the S-Body Legend 2 is a single 18650 battery or a 26650 battery. The battery can be recharged via the micro USB port at the bottom of the control face and battery access occurs via a threaded screw cap at the bottom of the Legend II. Recharging the cell takes about 2 to 3 hours and you may also hook the micro USB port to your computer and customize all settings via Evolv’s Escribe software.
S-Body Lengend II Features & Specifications
- Dimensions: 85mm x 46mm x 31mm
- Weight: 144g
- Made from zinc alloy and resin
- 4 color options
- 510 threaded bezel
- Ventilation holes
- Spring-loaded center pin
- Decorative 510 ring included
- Evolv DNA 75 chip board
- 8 alternate preset modes
- Power range: 1W to 75W
- Temperature control compatibility: SS, Ni, Ti
- Temperature range: 200°F to 600°F
- Lowest resistance power mode: 0.1?
- Lowest resistance in TC mode: 0.2?
- Compatible with 26650 or 18650 battery cell
- Bottom screw cap
- Micro USB charging system
- Micro USB Firmware upgrades
- Full Escribe customization via the micro USB port
