Here are cheap deals to purchase the Tesla Invader GT. This new pod system has a similar design to the old-style line of Invader mechanical mods. But, it is quite different from its predecessors as it features a 1200mAh integrated battery, 50 watts of output power, type-C USB charging, a myriad of protections, 3mL capacity cartridges, a side fill system, five output settings, four mesh coil options, and an RBA head.
-
Worldwide Shipping Deal: $20.61 Use coupon code
CheapVaping
at checkout (exclusive 10% off sitewide)
New! Voopoo Drag 5 177W TC Box Mod $34.99 | Drag 5 Kit $40.59
USA Blowout! Lost Vape Thelema Quest 200W Box Mod Kit $37.09
Invader GT Mod
Design-wise, this mod has an aluminum alloy chassis and is obtainable in blue, 7-color, black, golden, red, stainless steel, orchid realm, fire phoenix, blue phoenix, fairyland, sea of desire, and ice fire phoenix. With dimensions of 68mm by 43mm x 19.1mm, the device is portable and light due to a weight of just 110 grams. On the side control face is a fire button at the top, an adjustment knob to change output, and a mode selection button.
The Invader GT uses a built-in 1200mAh capacity cell that is stable and has longevity. You may recharge the battery in only 1.4 hours via a USB Type-C charging port. The GT has no display screen but utilizes an intelligent RGB LED to monitor the battery at the top of the control face. Power output may be adjusted by turning the previously-mentioned dial with five settings. You can also choose draw-activated firing, power button firing, or both by using several combinations of the power button. And for safety, there are several safety features, including short-circuit, 10s cutoff, low voltage, over-current, and charging protections.
Invader GT Pod
The pods with the Teslacigs Invader GT easily insert into the mod and stay in place with two strong magnets. Each cartridge has a 3mL vape juice limit and is refillable via a decent side-fill port with a silicone plug to prevent leakage. The nozzle on each cartridge rotates 360 degrees so you can freely choose the most comfortable angle, yet it is embedded so that it will never fall off.
There are four pre-built coils and an RBA coil option, all of which are replaceable and sure to satisfy your different airflow and taste preferences. The Mesh 0.2Ω is a DTL coil with a warm throat hit, massive vapor, and amazing flavor at 30 to 50 watts. The T-P2 Regular MTL coil has a 0.6Ω heating element and a large heating surface for balanced, dense vapor in the range of 13 to 23 watts. The T-P3 Mesh MTL coil has a 0.8Ω resistance for intense flavor from 10 to 15 watts. Finally, the T-P4 0.3Ω Mesh DTL coil features massive vapor with lots of flavors and should be used in the range of 20 to 35 watts. All the available coils are made with high-quality and safe materials such as organic cotton, iron, and chromium.