Check out the Eleaf iKonn 220. This kit features innovative temp control, safer fast charging, 200 watts of output, a large 0.96-inch screen, and utilizes dual 18650 batteries.
Overview
The iKonn 220 is an affordable mod from Eleaf with innovative temp control, safer fast charging, 200 watts of output, a large 0.96-inch screen, and utilizes a powerful 4600mAh battery.
The device measures 45mm x 30mm x 78.5mm, weighs 145.8g, and is ergonomic. The fire bar encompasses an entire side of the mod and results in comfortable holding and effortless mod operation. At the top, find a large bezel that is compatible with any 510 atomizer that has a diameter of 25mm or less. The front of the mod is built with a 0.96″ OLED display that features a vertical menu with vape data such as mode, wattage, temperature, resistance, voltage, and battery percentage level.
Powering the iKonn 220 box mod are dual 18650 batteries that should allow long vaping times, even at the highest possible output. The cell is topped off via a micro USB port on the control face with quick 2A charging. A new temperature protection setup built into the mod’s software assures charging the cell is safer than ever. The temperature range for charging is 23 degrees Fahrenheit to 122 degrees. The micro USB port also doubles as an upgrade port in case there’s a new operating system released on the Eleaf website. And there’s a reset button in case there’s a failure during a firmware upgrade.
The Ikuun I200 can be operated in the following modes: power, temperature control — nickel, titanium, stainless steel– and TCR mode, which can be stored in three memory slots. The resistance of this mod bottoms out at 0.05ohm in variable temperature modes and 0.10ohm in variable wattage mode, while the maximum temperature output is 600 degrees Fahrenheit.
Features & Specifications
- Measurements: 44mm x 28mm x 135mm
- Weight: 184.5g
- Powerful/portable mod
- Beautiful lines
- Colors: red, silver, black, white, blue, green
- 25mm 510 connector
- Large side fire bar — ergonomic
- Vertically oriented 0.96″ OLED
- Ventilation holes
- Compatible with dual 18650 batteries
- Temperature protection system during charging
- Temp range during charging: -5℃ to 50℃ or 23℉ to 122℉
- Fast 2A rate of charging
- Output modes: Power, TC Ni, TC SS, TC Ti, TCR x 3
- Power output range: 1W to 200W
- Temperature range: 200℉ to 600℉ or 100℃ to 315℃
- Maximum output current: 50A
- Power mode resistance range: 0.1Ω to 3.5Ω
- TC resistance range: 0.05Ω to 1.5Ω
- Many safety features
- Firmware upgrades
- Reset button