Here are cheap deals for the Vandy Vape Simple EX Squonk RDA Kit. This squonker kit features an integrated battery, an advanced chipset, an OLED display, nicotine salt compatibility, a mouth-to-lung vape experience, restricted airflow and a dual post deck with one wire hole on each post.
Update: This Item Is Out Of Stock Everywhere – Check Similar Squonk Kit & Mod Deals Below
From a design perspective, the dimensions of the mod come in at 58.5mm x 41mm x 23.6mm. The unit is made from lightweight nylon with ABS. AT the top of the mod, there’s a leak proof connector that hooks up to an internal 4ml capacity juice bottle that is easily refilled as the tank effortlessly slides out. The Simple EX operates with an integrated battery that results in a voltage range of 3.3 to 4.5 volts. On the control face, you will see an intuitive OLED display that shows current voltage output and battery charge level. There’s also a battery LED indicator and output is adjustable via two buttons in increments of 0.3 volts.
Included in the this kit is the simple EX RDA which features a 21mm diameter, an acrylic top cap and an optional delrin top cap. Underneath the chuff cap, you will find a dual post deck with one terminal per post. Wire is held in place via flathead slotted screws at the top of the posts. At the bottom, you will find a gold plated squonk BF 510 pin, but a standard one is also included if case you want to drip.
The Simple EX RDA is also capable of operating using nicotine salt e-liquids thanks in part to several airflow adjustment holes at the bottom of the atomizer. These can be widely adjusted from 2.5mm (restricted lung hit), to 2mm (10 to 20mg nic salt) to 1.5mm (20 to 30mg nic salt), to 1mm (30 to 40mg nic salt) to 0.8mm (40 to 50mg nic salt) or to 0.6mm (50 to 60mg nic salt). Please follow the directions for recommended voltage output with these airflow settings.
With purchase of the Simple EX Squonk Mod Kit, you will also receive two 1.24ohm Superfine MTL Fused Clapton coils, an allen key, a screwdriver, a standard 510 pin, extra parts, a micro USB charging cable, a warranty card and a manual.
Simple EX Squonk Kit Features & Specifications
- Wide range of airflow settings for MTL vape experience
- Works with nic salt juices
- Mod dimensions: 58.5mm x 41mm x 23.6mm
- RDA diameter: 21mm
- As compact as pod systems
- Lightweight Nylon & ABS Construction
- Colors: Pink, green, ultem, blue
- Internal battery with micro USB charging port
- 4ml internal juice bottle
- Advanced chipset
- Voltage output range: 3.3-4.5V
- Adjustable in increments of 0.3V
- OLED Screen
- Current voltage output
- Current battery level
- LED battery light
- Dual adjustment buttons
- Safety features
- Overtime protection
- No atomizer alert
- Low voltage protection
- Short circuit protection
- High temperature protection
- Squonk-Ready 510 Connection
- Standard pin included
- Clear acrylic top cap and optional Delrin
- Dual post deck with one large wire hole per post
- MTL vape experirence
- A myriad of air holes for restricted or nic salt vaping with recommendations for voltage output