The updated Eleaf Istick Pico 21700 uses a 21700 battery for extreme vaping times. It features amazing portability, 100 watts of output, many output modes, a fast 2 amp charging system, and 18650 battery compatibility. It is available in black, greenery, brushed silver, grey, hot pink, and silver. This small mod is outdated, so check out alternate Eleaf iStick Pico devices below
Eleaf iStick Pico Baby 25W Kit w/ GS Baby Tank $13.59
Eleaf iStick Pico Plus Mod $18.49 | Kit $29.06
Eleaf iStick Pico LE 75W Box Mod $20.49 | Kit w/ GX Tank $28.59
Eleaf iStick Pico 75W TC Mod $19.99
iStick Pico 21700 Overview
What sets this mod apart from previous Istick Pico mods is its 4000mAh 21700 battery compatibility, resulting in much longer vaping times, even if used at its 100-watt maximum output. Additionally, the unit is compatible with 18650 batteries by using the included sleeve. The installed cell can be recharged via the micro USB port that charges lightning fast thanks to a 2 amp current. If you prefer an external charger, you may access the battery by removing the screw tap at the top. Adjacent to this cap, the 510 threaded connector features a springloaded center pin to install atomizers over 25mm without overhang easily. The pin is also spring loaded to ensure the flush installation of a wide range of builds or tanks and gold plated for maximum conductivity. You will find a 0.91-inch display with the same familiar menu on the control face. You will see vape data on the user interface, such as a battery bar, voltage, resistance, amperage, and temperature/power level.
With the capability of operating in power mode, bypass mode, TCR mode, and temperature control with nickel, stainless steel, and titanium, the small Istick Pico 21700 is quite versatile. At 100 watts, the maximum output is very high, considering this is a tiny device. And the lowest atomizer resistance is 0.05ohm, making it extremely compatible with a wide range of atomizers, builds, or tanks. For safety, the unit is built with hardware and software battery protection that prevents a problem if the battery is inserted incorrectly or to stop overcharging, over-discharging, and over-current situations.
In the past, the popularity of Pico mods was due to its extreme portability and amazing design. The Eleaf Istick Pico 21700 box mod is certainly no exception. Its measurements are only 51mm x 26mm x 77mm, and its weight, with a 21700 battery installed, is only 165g (96.6g with an 18650). The modern design with rounded corners is almost identical to previous versions, as are the exquisite buttons and semigloss finish. Plus, the device was built in such as way as to be easy to carry and comfortable to hold.
Features & Specifications
- Measurements: 51mm x 26mm x 77mm
- Weight
- With 21700 battery: 165.3g
- With 18650 battery: 96.6g
- Small, portable, ergonomic 100W box mod
- Matte finish
- Colors: silver, hot pink, grey, brushed silver, greenery, black
- 0.91″ OLED display
- Ergonomic metal fire button
- 510 threaded connection bezel
- Handles atomizers over 25mm without overhang
- Springloaded center pin for flush atty installation
- Gold plated for maximum conductivity
- Uses a single 21700 battery
- Long vaping times
- Easy battery access via the screw cap
- Compatible with 18650 battery
- Use included battery sleeve
- Fast micro USB 2A charging system
- Firmware upgrades
- Output modes: VW/Bypass/TC-Ni/ TC-Ti/TC-SS/TCR
- Power output range: 1W to 100W
- Temperature control output range: 100℃ to 315℃ or 200℉ to 600℉
- Power mode resistance range: 0.1Ω to 3.5Ω
- TC mode resistance range: 0.05Ω to 1.5Ω
- Safety protections (hardware & software)
- Overcharging protection
- Over-current protection
- Over-discharging protection
- Reverse battery protection
- Included
- Eleaf Istick Pico 21700 Mod
- Micro USB cable
- Manual
