Update: The Rigmod Hotcig RSQ 80W Has Been Discontinued – Check Newer Squonk Kit & Mod Deals Or All Mod/Kit Deals
Wismec Luxotic Surface 80W TC Squonk Mod $26.79
Blowout! Vandy Vape Pulse AIO w/ Standard Pod & RBA Pod $24.64
Vandy Vape Pulse V2 95W TC Squonk Mod $39.99
Lost Vape Centaurus Quest BF: 100W TC Squonk Box Mod 55.49 | RDA Kit $71.99
Dovpo Pump Squonker Mechanical Box Mod $71.99
BP MODS Tomahawk SBS 60 Watt TC Squonker Box Mod $57.99
Wotofo Profile 80W/200W Squonk Box Mod $32.99
Eleaf iStick Pico Squeeze 2 100W TC Squonk RDA Kit 34.99
Overview
The Rigmod Hotcig RSQ features a squonk atomizer bezel, lightweight design, 80 watts of power, bypass mode, versatile temperature control, a 0.91″ OLED and a 7ml internal juice bottle.
Design-wise, this mod measures 79mm x 48mm x 25mm, is available in black, blue, silver, red and looks to be compact and light. On the control face, there’s a 0.91 inch screen of which the menu displays current mode, power/temperature, battery level, puff counts and more. On the backside of the RSQ Box Mod, there’s a magnetic panel that hides the single 18650 battery, which is recharged via the micro USB port and the 7ml internal silicone juice bottle. There is an RGB light next to the bottom feed that will indicate green, red, blue and a viewing window on the magnetic door allows easy viewing of the e-juice level. At the top, you will find a squonk ready 510 threaded connector for use with your favorite BF RTA or RDA.
With an HM chipboard, the RSQ Mod has a myriad of modes for a versatile vaping experience. These include bypass mode for use as a mechanical mod, power mode up to 80W, TCR mode and temperature control modes with stainless steel, nickel, titanium up to 600 Fahrenheit. The resistance comes in at a low 0.10ohm and there’s a wide range of safety protections for the safest possible experience.
Rigmod Hotcig RSQ Squonk Box Mod Features & Specifications
- Dimensions: 79mm x 48mm x 25mm
- Compact, light & easily transported
- Colors: red, silver, blue, black
- 0.91″ OLED display
- 7ml internal juice bottle
- Silicone & PE bottles included
- RGB light near bottom feed
- 510 threaded connection
- Stainless steel plating
- Bottom feed
- Accepts a single 18650 cell
- 1A micro USB charging system
- Cable included
- Firmware upgrades
- Waterproof HM chip board
- Operating modes: bypass, power, TC-Ni, TC-Ti, TC-SS, TCR
- Power output range: 1W to 80W
- Temperature range: 100℃ to 315℃ or 200℉-600℉
- Resistance Range: 0.1Ω to 3.0Ω
- Safety features
- Short circuit protection
- Reverse battery protection
- Overheat protection
- Low resistance protection
- High resistance protection
- Included:
- RSQ Squonk Mod
- Silicone juice bottle (soft)
- PE juice bottle (medium hardness)
- USB charging cable
- Manual
- Warranty
